Fix port toggle updates and device layout

CHANGELOG.md

@@ -1,8 +1,17 @@
 # Changelog
 
+## 0.0.19 - 2026-02-13
+- Fix port enable switches by updating config entry options properly.
+- Show port switches under the main integration device instead of per-port devices.
+
+## 0.0.18 - 2026-02-13
+- Add port devices with enable toggles and an edit-port flow.
+- Provide locale fallback translations for all Home Assistant languages.
+
 ## 0.0.17 - 2026-02-13
 - Add edit port flow to update existing option-based ports.
 - Add fallback translations for all supported Home Assistant locales.
+- Add per-port enable switches and device entries for quick overview.
 
 ## 0.0.16 - 2026-02-13
 - Normalize incoming event destinations and clamp percent payloads even without inversion.

README.md

@@ -23,6 +23,7 @@ Current minimal scope:
 2. Add Ports from the integration's configuration page.
    If the "Add Port" UI is missing, open the integration options and manage ports
    there (fallback for HA versions without subentry support).
+3. Each Port shows up as a device with an enable switch for quick on/off control.
 
 ### Binary Sensor Port
 - `entity_id`: the HA binary_sensor to mirror.
@@ -67,6 +68,6 @@ Each group address has `invert incoming` and `invert outgoing` toggles to flip K
 - Advanced DPT mapping options and inversion settings.
 
 ## Versioning and Releases
-- Current version: 0.0.17
+- Current version: 0.0.19
 - `CHANGELOG.md` lists versions with the newest entries at the top.
 - Release creation is manual and only done when explicitly requested.

custom_components/ha_knx_bridge/__init__.py

@@ -16,6 +16,7 @@ async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
         raise
     entry.runtime_data = manager
     entry.async_on_unload(entry.add_update_listener(_update_listener))
+    await hass.config_entries.async_forward_entry_setups(entry, ["switch"])
     return True
 
 
@@ -24,6 +25,7 @@ async def async_unload_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
     if manager is None:
         return True
     await manager.async_unload()
+    await hass.config_entries.async_unload_platforms(entry, ["switch"])
     return True
 
 

custom_components/ha_knx_bridge/bridge.py

@@ -19,6 +19,7 @@ from .const import (
     CONF_INVERT_OUTGOING,
     CONF_MOVE_LONG_ADDRESS,
     CONF_MOVE_SHORT_ADDRESS,
+    CONF_PORT_ENABLED,
     CONF_PORTS,
     CONF_POSITION_ADDRESS,
     CONF_POSITION_STATE_ADDRESS,
@@ -119,7 +120,12 @@ class BridgeManager:
         switch_ports: list[SwitchPort] = []
         cover_ports: list[CoverPort] = []
 
-        for port_type, data in _iter_port_configs(self.entry):
+        enabled_overrides = dict(self.entry.options.get(CONF_PORT_ENABLED, {}))
+        for port in _iter_port_configs(self.entry):
+            port_type = port.port_type
+            data = port.data
+            if not _is_port_enabled(port, enabled_overrides):
+                continue
             if port_type == "binary_sensor":
                 binary_ports.append(
                     BinarySensorPort(
@@ -683,15 +689,52 @@ def _event_destination(event: Event) -> str | None:
     )
 
 
-def _iter_port_configs(entry: ConfigEntry) -> list[tuple[str, dict[str, Any]]]:
+@dataclass(frozen=True)
-    ports: list[tuple[str, dict[str, Any]]] = []
+class PortConfig:
+    port_id: str
+    port_type: str
+    title: str
+    data: dict[str, Any]
+    enabled: bool | None
+
+
+def _iter_port_configs(entry: ConfigEntry) -> list[PortConfig]:
+    ports: list[PortConfig] = []
     subentries = getattr(entry, "subentries", [])
     for subentry in subentries:
-        ports.append((subentry.type, subentry.data))
+        ports.append(
+            PortConfig(
+                port_id=subentry.entry_id,
+                port_type=subentry.type,
+                title=subentry.title or subentry.entry_id,
+                data=subentry.data,
+                enabled=subentry.data.get(CONF_ENABLED),
+            )
+        )
     option_ports = entry.options.get(CONF_PORTS, [])
     for port in option_ports:
         port_type = port.get("type")
         data = port.get("data", {})
         if port_type and isinstance(data, dict):
-            ports.append((port_type, data))
+            ports.append(
+                PortConfig(
+                    port_id=port.get("id", ""),
+                    port_type=port_type,
+                    title=port.get("title", port.get("id", "Port")),
+                    data=data,
+                    enabled=port.get("enabled"),
+                )
+            )
     return ports
+
+
+def _is_port_enabled(port: PortConfig, overrides: dict[str, Any]) -> bool:
+    if port.port_id and port.port_id in overrides:
+        return bool(overrides[port.port_id])
+    if port.enabled is None:
+        return True
+    return bool(port.enabled)
+
+
+def iter_ports(entry: ConfigEntry) -> list[PortConfig]:
+    return _iter_port_configs(entry)

custom_components/ha_knx_bridge/config_flow.py

@@ -23,6 +23,8 @@ from .const import (
     CONF_PORT_ID,
     CONF_POSITION_ADDRESS,
     CONF_POSITION_STATE_ADDRESS,
+    CONF_ENABLED,
+    CONF_PORT_ENABLED,
     CONF_STATE_ADDRESS,
     CONF_STOP_ADDRESS,
     DOMAIN,
@@ -170,7 +172,12 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
         if user_input is not None:
             port_id = user_input[CONF_PORT_ID]
             ports = [port for port in ports if port.get("id") != port_id]
-            return self.async_create_entry(title="", data={CONF_PORTS: ports})
+            overrides = dict(self._config_entry.options.get(CONF_PORT_ENABLED, {}))
+            overrides.pop(port_id, None)
+            return self.async_create_entry(
+                title="",
+                data={CONF_PORTS: ports, CONF_PORT_ENABLED: overrides},
+            )
 
         options = [
             {
@@ -250,15 +257,22 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
     async def _async_store_port(self, port_type: str, user_input: dict):
         ports = list(self._config_entry.options.get(CONF_PORTS, []))
         title = _entity_title(self.hass, user_input[CONF_ENTITY_ID])
+        enabled = bool(user_input.get(CONF_ENABLED, True))
         ports.append(
             {
                 "id": uuid.uuid4().hex,
                 "type": port_type,
                 "title": title,
                 "data": user_input,
+                "enabled": enabled,
             }
         )
-        return self.async_create_entry(title="", data={CONF_PORTS: ports})
+        overrides = dict(self._config_entry.options.get(CONF_PORT_ENABLED, {}))
+        overrides[ports[-1]["id"]] = enabled
+        return self.async_create_entry(
+            title="",
+            data={CONF_PORTS: ports, CONF_PORT_ENABLED: overrides},
+        )
 
     async def _async_edit_port(self, port_type: str, user_input, schema_factory):
         ports = list(self._config_entry.options.get(CONF_PORTS, []))
@@ -284,9 +298,16 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
                 errors=errors,
             )
 
+        enabled = bool(user_input.get(CONF_ENABLED, True))
         port["data"] = user_input
+        port["enabled"] = enabled
         port["title"] = _entity_title(self.hass, user_input[CONF_ENTITY_ID])
-        return self.async_create_entry(title="", data={CONF_PORTS: ports})
+        overrides = dict(self._config_entry.options.get(CONF_PORT_ENABLED, {}))
+        overrides[port_id] = enabled
+        return self.async_create_entry(
+            title="",
+            data={CONF_PORTS: ports, CONF_PORT_ENABLED: overrides},
+        )
 
 
 class BinarySensorPortSubentryFlow(config_entries.ConfigSubentryFlow):
@@ -390,6 +411,9 @@ def _binary_sensor_schema(defaults: dict | None = None) -> vol.Schema:
             ): (
                 selector.BooleanSelector()
             ),
+            vol.Optional(CONF_ENABLED, default=bool(defaults.get(CONF_ENABLED, True))): (
+                selector.BooleanSelector()
+            ),
         }
     )
 
@@ -530,6 +554,9 @@ def _cover_schema(defaults: dict | None = None) -> vol.Schema:
             ): (
                 selector.BooleanSelector()
             ),
+            vol.Optional(CONF_ENABLED, default=bool(defaults.get(CONF_ENABLED, True))): (
+                selector.BooleanSelector()
+            ),
         }
     )
 
@@ -580,6 +607,9 @@ def _switch_schema(defaults: dict | None = None) -> vol.Schema:
             ): (
                 selector.BooleanSelector()
             ),
+            vol.Optional(CONF_ENABLED, default=bool(defaults.get(CONF_ENABLED, True))): (
+                selector.BooleanSelector()
+            ),
         }
     )
 

custom_components/ha_knx_bridge/const.py

@@ -8,6 +8,8 @@ CONF_INVERT_INCOMING = "invert_incoming"
 CONF_INVERT_OUTGOING = "invert_outgoing"
 CONF_PORTS = "ports"
 CONF_PORT_ID = "port_id"
+CONF_PORT_ENABLED = "port_enabled"
+CONF_ENABLED = "enabled"
 
 CONF_MOVE_LONG_ADDRESS = "move_long_address"
 CONF_MOVE_SHORT_ADDRESS = "move_short_address"

custom_components/ha_knx_bridge/manifest.json

@@ -1,7 +1,7 @@
 {
   "domain": "ha_knx_bridge",
   "name": "HA KNX Bridge",
-  "version": "0.0.17",
+  "version": "0.0.19",
   "config_flow": true,
   "documentation": "https://github.com/bahmcloud/HA-KNX-Bridge",
   "issue_tracker": "https://github.com/bahmcloud/HA-KNX-Bridge/issues",

custom_components/ha_knx_bridge/strings.json

@@ -99,7 +99,8 @@
             "entity_id": "Binary sensor entity",
             "state_address": "State group address (DPT 1)",
             "state_address_invert_incoming": "Invert incoming",
-            "state_address_invert_outgoing": "Invert outgoing"
+            "state_address_invert_outgoing": "Invert outgoing",
+            "enabled": "Enabled"
           }
         }
       }
@@ -115,7 +116,8 @@
             "command_address_invert_outgoing": "Invert outgoing",
             "state_address": "State group address (DPT 1)",
             "state_address_invert_incoming": "Invert incoming",
-            "state_address_invert_outgoing": "Invert outgoing"
+            "state_address_invert_outgoing": "Invert outgoing",
+            "enabled": "Enabled"
           }
         }
       }
@@ -146,7 +148,8 @@
             "angle_address_invert_outgoing": "Invert outgoing",
             "angle_state_address": "State tilt (DPT 5.001)",
             "angle_state_address_invert_incoming": "Invert incoming",
-            "angle_state_address_invert_outgoing": "Invert outgoing"
+            "angle_state_address_invert_outgoing": "Invert outgoing",
+            "enabled": "Enabled"
           }
         }
       }

custom_components/ha_knx_bridge/switch.py

@@ -0,0 +1,76 @@
+from __future__ import annotations
+
+from dataclasses import dataclass
+from typing import Any
+
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity import DeviceInfo
+from homeassistant.components.switch import SwitchEntity
+
+from .const import CONF_PORTS, CONF_PORT_ENABLED, DOMAIN
+from .bridge import iter_ports
+
+
+@dataclass(frozen=True)
+class PortDescriptor:
+    port_id: str
+    port_type: str
+    title: str
+
+
+async def async_setup_entry(
+    hass: HomeAssistant, entry: ConfigEntry, async_add_entities
+) -> None:
+    entities: list[SwitchEntity] = []
+    for port in iter_ports(entry):
+        entities.append(
+            PortEnabledSwitch(entry, port.port_id, port.port_type, port.title)
+        )
+    async_add_entities(entities, update_before_add=True)
+
+
+class PortEnabledSwitch(SwitchEntity):
+    _attr_has_entity_name = True
+
+    def __init__(self, entry: ConfigEntry, port_id: str, port_type: str, title: str):
+        self._entry = entry
+        self._port_id = port_id
+        self._port_type = port_type
+        self._title = title
+        self._attr_unique_id = f"{entry.entry_id}_{port_id}_enabled"
+
+    @property
+    def name(self) -> str:
+        return f"{self._title} Enabled"
+
+    @property
+    def device_info(self) -> DeviceInfo:
+        return DeviceInfo(
+            identifiers={(DOMAIN, self._entry.entry_id)},
+            name="HA KNX Bridge",
+            manufacturer="HA KNX Bridge",
+            model="Integration",
+        )
+
+    @property
+    def is_on(self) -> bool:
+        overrides = self._entry.options.get(CONF_PORT_ENABLED, {})
+        if self._port_id in overrides:
+            return bool(overrides[self._port_id])
+        return True
+
+    async def async_turn_on(self, **kwargs: Any) -> None:
+        await self._async_set_enabled(True)
+
+    async def async_turn_off(self, **kwargs: Any) -> None:
+        await self._async_set_enabled(False)
+
+    async def _async_set_enabled(self, enabled: bool) -> None:
+        overrides = dict(self._entry.options.get(CONF_PORT_ENABLED, {}))
+        overrides[self._port_id] = enabled
+        self.hass.config_entries.async_update_entry(
+            self._entry,
+            options={**self._entry.options, CONF_PORT_ENABLED: overrides},
+        )
+        await self.hass.config_entries.async_reload(self._entry.entry_id)

custom_components/ha_knx_bridge/translations/ar.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/bg.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/ca.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/cs.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/da.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/de.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/el.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/en.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/es.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/et.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/fi.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/fr.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/he.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/hi.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/hr.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/hu.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/id.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/is.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/it.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/ja.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/ko.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/lt.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/lv.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/nb.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/nl.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/pl.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/pt-BR.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/pt.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/ro.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/ru.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/sk.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/sl.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/sv.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/th.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/tr.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/uk.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/vi.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/zh-Hans.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/zh-Hant.json

@@ -22,7 +22,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -34,7 +35,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -61,7 +63,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -82,7 +85,8 @@
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_switch": {
@@ -94,7 +98,8 @@
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
           "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "edit_cover": {
@@ -121,7 +126,8 @@
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
           "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }