blueprint:
  name: "KNX Cover Control + Inverted Position Feedback (%)"
  description: >
    Control a Home Assistant cover entity via KNX group addresses (Up/Down + Stop)
    and send back an inverted position feedback in percent to KNX whenever the
    cover position changes (including changes initiated from Home Assistant).
    Example: HA 0% → KNX 100%, HA 100% → KNX 0%.
  domain: automation
  homeassistant:
    min_version: "2026.1.0"

  input:
    cover_entity:
      name: "Cover entity"
      description: "Select the cover to control."
      selector:
        entity:
          domain: cover

    ga_up_down:
      name: "KNX group address Up/Down"
      description: >
        1-bit command GA for Up/Down (typical: 0 = Up/Open, 1 = Down/Close).
        KNX mapping: Up/Down command object.
      selector:
        text:

    ga_stop:
      name: "KNX group address Stop"
      description: >
        1-bit command GA for Stop/Step.
        KNX mapping: Stop command object.
      selector:
        text:

    ga_position_feedback:
      name: "KNX position feedback (%) group address"
      description: >
        GA for inverted position feedback in percent (DPT 5.001 / type 'percent').
        KNX mapping: Position status feedback (0..100%).
      selector:
        text:

    invert_direction:
      name: "Invert Up/Down direction"
      description: >
        Enable if your KNX Up/Down semantics are reversed.
      default: false
      selector:
        boolean:

    feedback_cooldown_s:
      name: "Feedback cooldown (seconds)"
      description: >
        Minimum seconds between two KNX feedback telegrams to reduce bus traffic.
      default: 1
      selector:
        number:
          min: 0
          max: 30
          step: 1
          mode: slider

mode: queued
max: 10

variables:
  cover_entity: !input cover_entity
  ga_up_down: !input ga_up_down
  ga_stop: !input ga_stop
  ga_position_feedback: !input ga_position_feedback
  invert_direction: !input invert_direction
  feedback_cooldown_s: !input feedback_cooldown_s

trigger:
  # KNX Up/Down command
  - trigger: knx.telegram
    destination: !input ga_up_down
    incoming: true
    outgoing: false
    group_value_write: true
    group_value_read: false
    group_value_response: false
    id: knx_up_down

  # KNX Stop command
  - trigger: knx.telegram
    destination: !input ga_stop
    incoming: true
    outgoing: false
    group_value_write: true
    group_value_read: false
    group_value_response: false
    id: knx_stop

  # HA cover position change (attribute current_position)
  - trigger: state
    entity_id: !input cover_entity
    attribute: current_position
    id: ha_position_changed

condition: []

action:
  - choose:

      # -------- KNX Up/Down --------
      - conditions:
          - condition: trigger
            id: knx_up_down
        sequence:
          - variables:
              raw: "{{ trigger.payload | int(0) }}"
              # Normal semantics: 0 = Up/Open, 1 = Down/Close
              is_down: >-
                {% set down = (raw != 0) %}
                {{ (not down) if invert_direction else down }}
          - choose:
              - conditions: "{{ is_down }}"
                sequence:
                  - action: cover.close_cover
                    target:
                      entity_id: !input cover_entity
              - conditions: "{{ not is_down }}"
                sequence:
                  - action: cover.open_cover
                    target:
                      entity_id: !input cover_entity

      # -------- KNX Stop --------
      - conditions:
          - condition: trigger
            id: knx_stop
        sequence:
          - action: cover.stop_cover
            target:
              entity_id: !input cover_entity

      # -------- HA → KNX Inverted Position Feedback --------
      - conditions:
          - condition: trigger
            id: ha_position_changed
        sequence:
          - variables:
              # HA: 0% = closed, 100% = open
              # KNX inverted: 0% = open, 100% = closed
              pos: >-
                {% set p = state_attr(cover_entity, 'current_position') %}
                {% if p is not none %}
                  {{ 100 - (p | int) }}
                {% else %}
                  {{ none }}
                {% endif %}
          - condition: template
            value_template: "{{ pos is not none }}"
          - choose:
              - conditions: "{{ feedback_cooldown_s | int(0) > 0 }}"
                sequence:
                  - delay:
                      seconds: "{{ feedback_cooldown_s | int(0) }}"
          - action: knx.send
            data:
              address: !input ga_position_feedback
              type: percent
              payload: "{{ pos }}"
              response: false

    default: []