Remove incoming inversion toggles

.idea/PROJECT_STATE.md

@@ -0,0 +1,59 @@
+# Project State: HA KNX Bridge
+
+## Project Description
+HA KNX Bridge is a Home Assistant custom integration that mirrors Home Assistant entities
+to KNX group addresses and accepts KNX actions to control Home Assistant entities.
+It is installed via HACS and configured through the Home Assistant UI (config flow).
+The integration should:
+- Reuse an existing Home Assistant KNX integration entry when available.
+- Allow users to add "Ports" that bind a single HA entity to KNX group addresses.
+- Auto-select appropriate KNX DPTs and request only the group addresses needed.
+- Ignore missing/empty group addresses without errors.
+
+Target compatibility: Home Assistant 2025.12 with forward compatibility to 2026.2.
+
+Project rules:
+- Keep `README.md` updated for user-relevant changes after each new version.
+- Maintain `CHANGELOG.md` with newest entries at the top.
+- Releases are created only when explicitly requested.
+- Version number must match everywhere it is referenced (manifest, changelog, README, HACS if used).
+
+## Current State (as of 2026-02-15)
+Completed:
+- Repo initialized with `main` branch and pushed to GitHub.
+- HACS metadata (`hacs.json`) and base integration scaffold created.
+- Config flow created with subentries ("Ports") for:
+  - Binary Sensor
+  - Cover
+- KNX group address validation and normalization in subentry flows.
+- Options flow skeleton added (no options yet).
+- `bcs.yaml` metadata file added for BCS store listing.
+- Switch port support added (KNX command + state).
+- Per-address invert toggles added for incoming/outgoing payloads.
+- DPT auto-selection centralized for KNX event registration.
+- Port devices and enable switches added for quick overview and toggling.
+- Bridge manager implements:
+  - Binary sensor state -> KNX send (DPT 1)
+  - Cover KNX incoming commands -> HA services
+  - Cover HA state -> KNX percent updates (DPT 5.001)
+- README includes initial DPT mapping and roadmap.
+- Incoming invert toggles removed; outgoing inversion remains only for state addresses.
+- Project version set to 0.0.20 and `CHANGELOG.md` maintained.
+
+Files created:
+- `custom_components/ha_knx_bridge/__init__.py`
+- `custom_components/ha_knx_bridge/bridge.py`
+- `custom_components/ha_knx_bridge/config_flow.py`
+- `custom_components/ha_knx_bridge/const.py`
+- `custom_components/ha_knx_bridge/manifest.json`
+- `custom_components/ha_knx_bridge/strings.json`
+- `hacs.json`
+- `README.md`
+- `CHANGELOG.md`
+- `.gitignore`
+
+Open items / next steps:
+- Add optional option flow for future settings.
+- Expand entity coverage (light, switch, sensor, climate).
+- Add tests (config flow, KNX mapping).
+- Improve DPT auto-selection logic per entity features.

CHANGELOG.md

@@ -1,5 +1,27 @@
 # Changelog
 
+## 0.0.20 - 2026-02-15
+- Remove incoming invert toggles; keep outgoing inversion only for state addresses.
+
+## 0.0.19 - 2026-02-13
+- Fix port enable switches by updating config entry options properly.
+- Show port switches under the main integration device instead of per-port devices.
+
+## 0.0.18 - 2026-02-13
+- Add port devices with enable toggles and an edit-port flow.
+- Provide locale fallback translations for all Home Assistant languages.
+
+## 0.0.17 - 2026-02-13
+- Add edit port flow to update existing option-based ports.
+- Add fallback translations for all supported Home Assistant locales.
+- Add per-port enable switches and device entries for quick overview.
+
+## 0.0.16 - 2026-02-13
+- Normalize incoming event destinations and clamp percent payloads even without inversion.
+
+## 0.0.15 - 2026-02-13
+- Remove unsupported `payload_length` field from KNX send calls.
+
 ## 0.0.14 - 2026-02-13
 - Improve KNX event decoding for cover commands and address the up/down mapping.
 

README.md

@@ -23,6 +23,7 @@ Current minimal scope:
 2. Add Ports from the integration's configuration page.
    If the "Add Port" UI is missing, open the integration options and manage ports
    there (fallback for HA versions without subentry support).
+3. Each Port shows up as a device with an enable switch for quick on/off control.
 
 ### Binary Sensor Port
 - `entity_id`: the HA binary_sensor to mirror.
@@ -39,7 +40,7 @@ Current minimal scope:
 
 If a group address is left empty, it is ignored.
 Group address format must be `X/Y/Z` (0-31/0-7/0-255) or `X/Y` (0-31/0-2047).
-Each group address has `invert incoming` and `invert outgoing` toggles to flip KNX payloads.
+Only state addresses expose an `invert outgoing` toggle to flip KNX payloads.
 
 ### Switch Port
 - `entity_id`: the HA switch to control/monitor.
@@ -67,6 +68,6 @@ Each group address has `invert incoming` and `invert outgoing` toggles to flip K
 - Advanced DPT mapping options and inversion settings.
 
 ## Versioning and Releases
-- Current version: 0.0.14
+- Current version: 0.0.20
 - `CHANGELOG.md` lists versions with the newest entries at the top.
 - Release creation is manual and only done when explicitly requested.

custom_components/ha_knx_bridge/__init__.py

@@ -16,6 +16,7 @@ async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
         raise
     entry.runtime_data = manager
     entry.async_on_unload(entry.add_update_listener(_update_listener))
+    await hass.config_entries.async_forward_entry_setups(entry, ["switch"])
     return True
 
 
@@ -24,6 +25,7 @@ async def async_unload_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
     if manager is None:
         return True
     await manager.async_unload()
+    await hass.config_entries.async_unload_platforms(entry, ["switch"])
     return True
 
 

custom_components/ha_knx_bridge/bridge.py

@@ -15,10 +15,10 @@ from .const import (
     ADDRESS_EVENT_TYPE,
     ADDRESS_VALUE_TYPE,
     CONF_COMMAND_ADDRESS,
-    CONF_INVERT_INCOMING,
     CONF_INVERT_OUTGOING,
     CONF_MOVE_LONG_ADDRESS,
     CONF_MOVE_SHORT_ADDRESS,
+    CONF_PORT_ENABLED,
     CONF_PORTS,
     CONF_POSITION_ADDRESS,
     CONF_POSITION_STATE_ADDRESS,
@@ -35,7 +35,6 @@ KNX_DOMAIN = "knx"
 class BinarySensorPort:
     entity_id: str
     state_address: str | None
-    state_invert_incoming: bool
     state_invert_outgoing: bool
 
 
@@ -43,25 +42,13 @@ class BinarySensorPort:
 class CoverPort:
     entity_id: str
     move_long_address: str | None
-    move_long_invert_incoming: bool
-    move_long_invert_outgoing: bool
     move_short_address: str | None
-    move_short_invert_incoming: bool
-    move_short_invert_outgoing: bool
     stop_address: str | None
-    stop_invert_incoming: bool
-    stop_invert_outgoing: bool
     position_address: str | None
-    position_invert_incoming: bool
-    position_invert_outgoing: bool
     position_state_address: str | None
-    position_state_invert_incoming: bool
     position_state_invert_outgoing: bool
     angle_address: str | None
-    angle_invert_incoming: bool
-    angle_invert_outgoing: bool
     angle_state_address: str | None
-    angle_state_invert_incoming: bool
     angle_state_invert_outgoing: bool
 
 
@@ -70,16 +57,12 @@ class SwitchPort:
     entity_id: str
     command_address: str | None
     state_address: str | None
-    command_invert_incoming: bool
-    command_invert_outgoing: bool
-    state_invert_incoming: bool
     state_invert_outgoing: bool
 
 
 @dataclass(frozen=True)
 class AddressOptions:
     value_type: str | None
-    invert_incoming: bool
     invert_outgoing: bool
 
 
@@ -119,15 +102,17 @@ class BridgeManager:
         switch_ports: list[SwitchPort] = []
         cover_ports: list[CoverPort] = []
 
-        for port_type, data in _iter_port_configs(self.entry):
+        enabled_overrides = dict(self.entry.options.get(CONF_PORT_ENABLED, {}))
+        for port in _iter_port_configs(self.entry):
+            port_type = port.port_type
+            data = port.data
+            if not _is_port_enabled(port, enabled_overrides):
+                continue
             if port_type == "binary_sensor":
                 binary_ports.append(
                     BinarySensorPort(
                         entity_id=data["entity_id"],
                         state_address=_clean_address(data.get(CONF_STATE_ADDRESS)),
-                        state_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_STATE_ADDRESS))
-                        ),
                         state_invert_outgoing=_clean_bool(
                             data.get(_invert_out_key(CONF_STATE_ADDRESS))
                         ),
@@ -141,15 +126,6 @@ class BridgeManager:
                             data.get(CONF_COMMAND_ADDRESS)
                         ),
                         state_address=_clean_address(data.get(CONF_STATE_ADDRESS)),
-                        command_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_COMMAND_ADDRESS))
-                        ),
-                        command_invert_outgoing=_clean_bool(
-                            data.get(_invert_out_key(CONF_COMMAND_ADDRESS))
-                        ),
-                        state_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_STATE_ADDRESS))
-                        ),
                         state_invert_outgoing=_clean_bool(
                             data.get(_invert_out_key(CONF_STATE_ADDRESS))
                         ),
@@ -160,55 +136,19 @@ class BridgeManager:
                     CoverPort(
                         entity_id=data["entity_id"],
                         move_long_address=_clean_address(data.get(CONF_MOVE_LONG_ADDRESS)),
-                        move_long_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_MOVE_LONG_ADDRESS))
-                        ),
-                        move_long_invert_outgoing=_clean_bool(
-                            data.get(_invert_out_key(CONF_MOVE_LONG_ADDRESS))
-                        ),
                         move_short_address=_clean_address(data.get(CONF_MOVE_SHORT_ADDRESS)),
-                        move_short_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_MOVE_SHORT_ADDRESS))
-                        ),
-                        move_short_invert_outgoing=_clean_bool(
-                            data.get(_invert_out_key(CONF_MOVE_SHORT_ADDRESS))
-                        ),
                         stop_address=_clean_address(data.get(CONF_STOP_ADDRESS)),
-                        stop_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_STOP_ADDRESS))
-                        ),
-                        stop_invert_outgoing=_clean_bool(
-                            data.get(_invert_out_key(CONF_STOP_ADDRESS))
-                        ),
                         position_address=_clean_address(data.get(CONF_POSITION_ADDRESS)),
-                        position_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_POSITION_ADDRESS))
-                        ),
-                        position_invert_outgoing=_clean_bool(
-                            data.get(_invert_out_key(CONF_POSITION_ADDRESS))
-                        ),
                         position_state_address=_clean_address(
                             data.get(CONF_POSITION_STATE_ADDRESS)
                         ),
-                        position_state_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_POSITION_STATE_ADDRESS))
-                        ),
                         position_state_invert_outgoing=_clean_bool(
                             data.get(_invert_out_key(CONF_POSITION_STATE_ADDRESS))
                         ),
                         angle_address=_clean_address(data.get(CONF_ANGLE_ADDRESS)),
-                        angle_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_ANGLE_ADDRESS))
-                        ),
-                        angle_invert_outgoing=_clean_bool(
-                            data.get(_invert_out_key(CONF_ANGLE_ADDRESS))
-                        ),
                         angle_state_address=_clean_address(
                             data.get(CONF_ANGLE_STATE_ADDRESS)
                         ),
-                        angle_state_invert_incoming=_clean_bool(
-                            data.get(_invert_in_key(CONF_ANGLE_STATE_ADDRESS))
-                        ),
                         angle_state_invert_outgoing=_clean_bool(
                             data.get(_invert_out_key(CONF_ANGLE_STATE_ADDRESS))
                         ),
@@ -229,7 +169,6 @@ class BridgeManager:
             self._remember_address_options(
                 port.state_address,
                 _get_value_type(CONF_STATE_ADDRESS),
-                port.state_invert_incoming,
                 port.state_invert_outgoing,
             )
             self._unsub_listeners.append(
@@ -244,7 +183,6 @@ class BridgeManager:
             self._remember_address_options(
                 port.state_address,
                 _get_value_type(CONF_STATE_ADDRESS),
-                port.state_invert_incoming,
                 port.state_invert_outgoing,
             )
             self._unsub_listeners.append(
@@ -260,14 +198,12 @@ class BridgeManager:
                 self._remember_address_options(
                     port.position_state_address,
                     _get_value_type(CONF_POSITION_STATE_ADDRESS),
-                    port.position_state_invert_incoming,
                     port.position_state_invert_outgoing,
                 )
             if port.angle_state_address:
                 self._remember_address_options(
                     port.angle_state_address,
                     _get_value_type(CONF_ANGLE_STATE_ADDRESS),
-                    port.angle_state_invert_incoming,
                     port.angle_state_invert_outgoing,
                 )
             self._unsub_listeners.append(
@@ -282,8 +218,6 @@ class BridgeManager:
         for port in switch_ports:
             self._register_knx_switch_address(
                 port.command_address,
-                port.command_invert_incoming,
-                port.command_invert_outgoing,
                 port,
             )
 
@@ -291,40 +225,30 @@ class BridgeManager:
             self._register_knx_address(
                 port.move_long_address,
                 CONF_MOVE_LONG_ADDRESS,
-                port.move_long_invert_incoming,
-                port.move_long_invert_outgoing,
                 port,
                 "move_long",
             )
             self._register_knx_address(
                 port.move_short_address,
                 CONF_MOVE_SHORT_ADDRESS,
-                port.move_short_invert_incoming,
-                port.move_short_invert_outgoing,
                 port,
                 "move_short",
             )
             self._register_knx_address(
                 port.stop_address,
                 CONF_STOP_ADDRESS,
-                port.stop_invert_incoming,
-                port.stop_invert_outgoing,
                 port,
                 "stop",
             )
             self._register_knx_address(
                 port.position_address,
                 CONF_POSITION_ADDRESS,
-                port.position_invert_incoming,
-                port.position_invert_outgoing,
                 port,
                 "position",
             )
             self._register_knx_address(
                 port.angle_address,
                 CONF_ANGLE_ADDRESS,
-                port.angle_invert_incoming,
-                port.angle_invert_outgoing,
                 port,
                 "angle",
             )
@@ -345,8 +269,6 @@ class BridgeManager:
         self,
         address: str | None,
         address_key: str,
-        invert_incoming: bool,
-        invert_outgoing: bool,
         port: CoverPort,
         action: str,
     ) -> None:
@@ -359,15 +281,13 @@ class BridgeManager:
         value_type = _get_value_type(address_key)
         event_type = _get_event_type(address_key)
         self._remember_address_options(
-            address, value_type, invert_incoming, invert_outgoing
+            address, value_type, False
         )
         self._registered_addresses.append((address, event_type))
 
     def _register_knx_switch_address(
         self,
         address: str | None,
-        invert_incoming: bool,
-        invert_outgoing: bool,
         port: SwitchPort,
     ) -> None:
         if not address:
@@ -378,8 +298,7 @@ class BridgeManager:
         self._remember_address_options(
             address,
             _get_value_type(CONF_COMMAND_ADDRESS),
-            invert_incoming,
-            invert_outgoing,
+            False,
         )
         self._registered_addresses.append((address, _get_event_type(CONF_COMMAND_ADDRESS)))
 
@@ -387,12 +306,10 @@ class BridgeManager:
         self,
         address: str,
         value_type: str | None,
-        invert_incoming: bool,
         invert_outgoing: bool,
     ) -> None:
         self._address_options[address] = AddressOptions(
             value_type=value_type,
-            invert_incoming=invert_incoming,
             invert_outgoing=invert_outgoing,
         )
 
@@ -424,7 +341,7 @@ class BridgeManager:
                 return
             payload = 1 if new_state.state == "on" else 0
             payload = _invert_value(
-                payload, port.state_address, self._address_options, "outgoing"
+                payload, port.state_address, self._address_options
             )
             await self._knx_send_raw(port.state_address, payload)
 
@@ -439,7 +356,7 @@ class BridgeManager:
                 return
             payload = 1 if new_state.state == "on" else 0
             payload = _invert_value(
-                payload, port.state_address, self._address_options, "outgoing"
+                payload, port.state_address, self._address_options
             )
             await self._knx_send_raw(port.state_address, payload)
 
@@ -458,7 +375,6 @@ class BridgeManager:
                         position,
                         port.position_state_address,
                         self._address_options,
-                        "outgoing",
                     )
                     await self._knx_send_percent(
                         port.position_state_address, position
@@ -471,7 +387,6 @@ class BridgeManager:
                         angle,
                         port.angle_state_address,
                         self._address_options,
-                        "outgoing",
                     )
                     await self._knx_send_percent(port.angle_state_address, angle)
 
@@ -482,11 +397,7 @@ class BridgeManager:
         if direction is not None and not str(direction).lower().startswith("incoming"):
             return
 
-        destination = (
-            event.data.get("destination")
-            or event.data.get("destination_address")
-            or event.data.get("address")
-        )
+        destination = _event_destination(event)
         if not destination:
             return
 
@@ -502,9 +413,8 @@ class BridgeManager:
         value = _extract_event_value(event)
         if value is None:
             return
-        value = _invert_value(
-            value, event.data.get("destination"), self._address_options, "incoming"
-        )
+        destination = _event_destination(event)
+        value = _invert_value(value, destination, self._address_options)
 
         if action == "move_long":
             if value == 0:
@@ -530,9 +440,8 @@ class BridgeManager:
         value = _extract_event_value(event)
         if value is None:
             return
-        value = _invert_value(
-            value, event.data.get("destination"), self._address_options, "incoming"
-        )
+        destination = _event_destination(event)
+        value = _invert_value(value, destination, self._address_options)
         if value == 0:
             await self._call_switch_service(port.entity_id, "turn_off")
         elif value == 1:
@@ -564,7 +473,7 @@ class BridgeManager:
         await self.hass.services.async_call(
             KNX_DOMAIN,
             "send",
-            {"address": address, "payload": payload, "payload_length": 0},
+            {"address": address, "payload": payload},
             blocking=False,
         )
 
@@ -617,31 +526,23 @@ def _invert_value(
     value: int,
     address: str | None,
     address_options: dict[str, AddressOptions],
-    direction: str,
 ) -> int:
     if address is None:
         return value
     options = address_options.get(address)
     if options is None:
         return value
-    if direction == "incoming":
-        if not options.invert_incoming:
-            return value
-    else:
-        if not options.invert_outgoing:
-            return value
     if options.value_type == "percent":
         value = _clamp_percent(value)
+    if not options.invert_outgoing:
+        return value
+    if options.value_type == "percent":
         return 100 - value
     if value not in (0, 1):
         return value
     return 0 if value == 1 else 1
 
 
-def _invert_in_key(address_key: str) -> str:
-    return f"{address_key}_{CONF_INVERT_INCOMING}"
-
-
 def _invert_out_key(address_key: str) -> str:
     return f"{address_key}_{CONF_INVERT_OUTGOING}"
 
@@ -680,15 +581,60 @@ def _map_scalar_value(value: Any) -> int | None:
     return None
 
 
-def _iter_port_configs(entry: ConfigEntry) -> list[tuple[str, dict[str, Any]]]:
-    ports: list[tuple[str, dict[str, Any]]] = []
+def _event_destination(event: Event) -> str | None:
+    return (
+        event.data.get("destination")
+        or event.data.get("destination_address")
+        or event.data.get("address")
+    )
+
+
+@dataclass(frozen=True)
+class PortConfig:
+    port_id: str
+    port_type: str
+    title: str
+    data: dict[str, Any]
+    enabled: bool | None
+
+
+def _iter_port_configs(entry: ConfigEntry) -> list[PortConfig]:
+    ports: list[PortConfig] = []
     subentries = getattr(entry, "subentries", [])
     for subentry in subentries:
-        ports.append((subentry.type, subentry.data))
+        ports.append(
+            PortConfig(
+                port_id=subentry.entry_id,
+                port_type=subentry.type,
+                title=subentry.title or subentry.entry_id,
+                data=subentry.data,
+                enabled=subentry.data.get(CONF_ENABLED),
+            )
+        )
     option_ports = entry.options.get(CONF_PORTS, [])
     for port in option_ports:
         port_type = port.get("type")
         data = port.get("data", {})
         if port_type and isinstance(data, dict):
-            ports.append((port_type, data))
+            ports.append(
+                PortConfig(
+                    port_id=port.get("id", ""),
+                    port_type=port_type,
+                    title=port.get("title", port.get("id", "Port")),
+                    data=data,
+                    enabled=port.get("enabled"),
+                )
+            )
     return ports
+
+
+def _is_port_enabled(port: PortConfig, overrides: dict[str, Any]) -> bool:
+    if port.port_id and port.port_id in overrides:
+        return bool(overrides[port.port_id])
+    if port.enabled is None:
+        return True
+    return bool(port.enabled)
+
+
+def iter_ports(entry: ConfigEntry) -> list[PortConfig]:
+    return _iter_port_configs(entry)

custom_components/ha_knx_bridge/config_flow.py

@@ -14,7 +14,6 @@ from .const import (
     CONF_ANGLE_ADDRESS,
     CONF_ANGLE_STATE_ADDRESS,
     CONF_COMMAND_ADDRESS,
-    CONF_INVERT_INCOMING,
     CONF_INVERT_OUTGOING,
     CONF_KNX_ENTRY_ID,
     CONF_MOVE_LONG_ADDRESS,
@@ -23,6 +22,8 @@ from .const import (
     CONF_PORT_ID,
     CONF_POSITION_ADDRESS,
     CONF_POSITION_STATE_ADDRESS,
+    CONF_ENABLED,
+    CONF_PORT_ENABLED,
     CONF_STATE_ADDRESS,
     CONF_STOP_ADDRESS,
     DOMAIN,
@@ -98,6 +99,7 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
                 "add_binary_sensor",
                 "add_switch",
                 "add_cover",
+                "edit_port",
                 "remove_port",
             ],
         )
@@ -169,7 +171,12 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
         if user_input is not None:
             port_id = user_input[CONF_PORT_ID]
             ports = [port for port in ports if port.get("id") != port_id]
-            return self.async_create_entry(title="", data={CONF_PORTS: ports})
+            overrides = dict(self._config_entry.options.get(CONF_PORT_ENABLED, {}))
+            overrides.pop(port_id, None)
+            return self.async_create_entry(
+                title="",
+                data={CONF_PORTS: ports, CONF_PORT_ENABLED: overrides},
+            )
 
         options = [
             {
@@ -188,18 +195,118 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
         )
         return self.async_show_form(step_id="remove_port", data_schema=schema)
 
+    async def async_step_edit_port(self, user_input: dict | None = None):
+        ports = list(self._config_entry.options.get(CONF_PORTS, []))
+        if not ports:
+            return self.async_abort(reason="no_ports_to_edit")
+
+        if user_input is not None and CONF_PORT_ID in user_input:
+            port_id = user_input[CONF_PORT_ID]
+            port = next((item for item in ports if item.get("id") == port_id), None)
+            if port is None:
+                return self.async_abort(reason="no_ports_to_edit")
+            self.context["port_id"] = port_id
+            port_type = port.get("type")
+            data = port.get("data", {})
+            if port_type == "binary_sensor":
+                return self.async_show_form(
+                    step_id="edit_binary_sensor",
+                    data_schema=_binary_sensor_schema(defaults=data),
+                )
+            if port_type == "switch":
+                return self.async_show_form(
+                    step_id="edit_switch",
+                    data_schema=_switch_schema(defaults=data),
+                )
+            if port_type == "cover":
+                return self.async_show_form(
+                    step_id="edit_cover",
+                    data_schema=_cover_schema(defaults=data),
+                )
+            return self.async_abort(reason="no_ports_to_edit")
+
+        options = [
+            {
+                "value": port.get("id"),
+                "label": port.get("title", port.get("id")),
+            }
+            for port in ports
+            if port.get("id")
+        ]
+        schema = vol.Schema(
+            {
+                vol.Required(CONF_PORT_ID): selector.SelectSelector(
+                    selector.SelectSelectorConfig(options=options, mode="dropdown")
+                )
+            }
+        )
+        return self.async_show_form(step_id="edit_port", data_schema=schema)
+
+    async def async_step_edit_binary_sensor(self, user_input: dict | None = None):
+        return await self._async_edit_port(
+            "binary_sensor", user_input, _binary_sensor_schema
+        )
+
+    async def async_step_edit_switch(self, user_input: dict | None = None):
+        return await self._async_edit_port("switch", user_input, _switch_schema)
+
+    async def async_step_edit_cover(self, user_input: dict | None = None):
+        return await self._async_edit_port("cover", user_input, _cover_schema)
+
     async def _async_store_port(self, port_type: str, user_input: dict):
         ports = list(self._config_entry.options.get(CONF_PORTS, []))
         title = _entity_title(self.hass, user_input[CONF_ENTITY_ID])
+        enabled = bool(user_input.get(CONF_ENABLED, True))
         ports.append(
             {
                 "id": uuid.uuid4().hex,
                 "type": port_type,
                 "title": title,
                 "data": user_input,
+                "enabled": enabled,
             }
         )
-        return self.async_create_entry(title="", data={CONF_PORTS: ports})
+        overrides = dict(self._config_entry.options.get(CONF_PORT_ENABLED, {}))
+        overrides[ports[-1]["id"]] = enabled
+        return self.async_create_entry(
+            title="",
+            data={CONF_PORTS: ports, CONF_PORT_ENABLED: overrides},
+        )
+
+    async def _async_edit_port(self, port_type: str, user_input, schema_factory):
+        ports = list(self._config_entry.options.get(CONF_PORTS, []))
+        port_id = self.context.get("port_id")
+        if port_id is None:
+            return self.async_abort(reason="no_ports_to_edit")
+
+        port = next((item for item in ports if item.get("id") == port_id), None)
+        if port is None:
+            return self.async_abort(reason="no_ports_to_edit")
+
+        if user_input is None:
+            return self.async_show_form(
+                step_id=f"edit_{port_type}",
+                data_schema=schema_factory(defaults=port.get("data", {})),
+            )
+
+        user_input, errors = _validate_knx_addresses(user_input, _port_keys(port_type))
+        if errors:
+            return self.async_show_form(
+                step_id=f"edit_{port_type}",
+                data_schema=schema_factory(defaults=user_input),
+                errors=errors,
+            )
+
+        enabled = bool(user_input.get(CONF_ENABLED, True))
+        port["data"] = user_input
+        port["enabled"] = enabled
+        port["title"] = _entity_title(self.hass, user_input[CONF_ENTITY_ID])
+        overrides = dict(self._config_entry.options.get(CONF_PORT_ENABLED, {}))
+        overrides[port_id] = enabled
+        return self.async_create_entry(
+            title="",
+            data={CONF_PORTS: ports, CONF_PORT_ENABLED: overrides},
+        )
 
 
 class BinarySensorPortSubentryFlow(config_entries.ConfigSubentryFlow):
@@ -275,126 +382,159 @@ def _entity_title(hass, entity_id: str) -> str:
     return state.attributes.get("friendly_name", entity_id)
 
 
-def _binary_sensor_schema() -> vol.Schema:
+def _binary_sensor_schema(defaults: dict | None = None) -> vol.Schema:
+    defaults = defaults or {}
     return vol.Schema(
         {
-            vol.Required(CONF_ENTITY_ID): selector.EntitySelector(
+            vol.Required(
+                CONF_ENTITY_ID,
+                default=defaults.get(CONF_ENTITY_ID, ""),
+            ): selector.EntitySelector(
                 selector.EntitySelectorConfig(domain=["binary_sensor"])
             ),
-            vol.Optional(CONF_STATE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_STATE_ADDRESS,
+                default=defaults.get(CONF_STATE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_STATE_ADDRESS), default=False): (
+            vol.Optional(CONF_ENABLED, default=bool(defaults.get(CONF_ENABLED, True))): (
                 selector.BooleanSelector()
             ),
         }
     )
 
 
-def _cover_schema() -> vol.Schema:
+def _cover_schema(defaults: dict | None = None) -> vol.Schema:
+    defaults = defaults or {}
     return vol.Schema(
         {
-            vol.Required(CONF_ENTITY_ID): selector.EntitySelector(
+            vol.Required(
+                CONF_ENTITY_ID,
+                default=defaults.get(CONF_ENTITY_ID, ""),
+            ): selector.EntitySelector(
                 selector.EntitySelectorConfig(domain=["cover"])
             ),
-            vol.Optional(CONF_MOVE_LONG_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_MOVE_LONG_ADDRESS,
+                default=defaults.get(CONF_MOVE_LONG_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_MOVE_LONG_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(_invert_out_key(CONF_MOVE_LONG_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(CONF_MOVE_SHORT_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_MOVE_SHORT_ADDRESS,
+                default=defaults.get(CONF_MOVE_SHORT_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_MOVE_SHORT_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(_invert_out_key(CONF_MOVE_SHORT_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(CONF_STOP_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_STOP_ADDRESS,
+                default=defaults.get(CONF_STOP_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_STOP_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(_invert_out_key(CONF_STOP_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(CONF_POSITION_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_POSITION_ADDRESS,
+                default=defaults.get(CONF_POSITION_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_POSITION_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(_invert_out_key(CONF_POSITION_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(CONF_POSITION_STATE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_POSITION_STATE_ADDRESS,
+                default=defaults.get(CONF_POSITION_STATE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_POSITION_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_POSITION_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_POSITION_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_POSITION_STATE_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(CONF_ANGLE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_ANGLE_ADDRESS,
+                default=defaults.get(CONF_ANGLE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_ANGLE_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(_invert_out_key(CONF_ANGLE_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(CONF_ANGLE_STATE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_ANGLE_STATE_ADDRESS,
+                default=defaults.get(CONF_ANGLE_STATE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_ANGLE_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_ANGLE_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_ANGLE_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_ANGLE_STATE_ADDRESS), default=False): (
+            vol.Optional(CONF_ENABLED, default=bool(defaults.get(CONF_ENABLED, True))): (
                 selector.BooleanSelector()
             ),
         }
     )
 
 
-def _switch_schema() -> vol.Schema:
+def _switch_schema(defaults: dict | None = None) -> vol.Schema:
+    defaults = defaults or {}
     return vol.Schema(
         {
-            vol.Required(CONF_ENTITY_ID): selector.EntitySelector(
+            vol.Required(
+                CONF_ENTITY_ID,
+                default=defaults.get(CONF_ENTITY_ID, ""),
+            ): selector.EntitySelector(
                 selector.EntitySelectorConfig(domain=["switch"])
             ),
-            vol.Optional(CONF_COMMAND_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_COMMAND_ADDRESS,
+                default=defaults.get(CONF_COMMAND_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_COMMAND_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(_invert_out_key(CONF_COMMAND_ADDRESS), default=False): (
-                selector.BooleanSelector()
-            ),
-            vol.Optional(CONF_STATE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_STATE_ADDRESS,
+                default=defaults.get(CONF_STATE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_STATE_ADDRESS), default=False): (
+            vol.Optional(CONF_ENABLED, default=bool(defaults.get(CONF_ENABLED, True))): (
                 selector.BooleanSelector()
             ),
         }
     )
 
 
+def _port_keys(port_type: str) -> list[str]:
+    if port_type == "binary_sensor":
+        return [CONF_STATE_ADDRESS]
+    if port_type == "switch":
+        return [CONF_COMMAND_ADDRESS, CONF_STATE_ADDRESS]
+    if port_type == "cover":
+        return [
+            CONF_MOVE_LONG_ADDRESS,
+            CONF_MOVE_SHORT_ADDRESS,
+            CONF_STOP_ADDRESS,
+            CONF_POSITION_ADDRESS,
+            CONF_POSITION_STATE_ADDRESS,
+            CONF_ANGLE_ADDRESS,
+            CONF_ANGLE_STATE_ADDRESS,
+        ]
+    return []
+
+
 def _validate_knx_addresses(
     user_input: dict, keys: list[str]
 ) -> tuple[dict, dict[str, str]]:
@@ -406,7 +546,6 @@ def _validate_knx_addresses(
         value = cleaned.get(key)
         if value is None:
             cleaned.pop(key, None)
-            cleaned.pop(_invert_in_key(key), None)
             cleaned.pop(_invert_out_key(key), None)
             continue
         try:
@@ -416,7 +555,6 @@ def _validate_knx_addresses(
             continue
         if normalized == "":
             cleaned.pop(key, None)
-            cleaned.pop(_invert_in_key(key), None)
             cleaned.pop(_invert_out_key(key), None)
         else:
             cleaned[key] = normalized
@@ -452,10 +590,6 @@ def _parse_int(value: str) -> int:
     return int(text)
 
 
-def _invert_in_key(address_key: str) -> str:
-    return f"{address_key}_{CONF_INVERT_INCOMING}"
-
-
 def _invert_out_key(address_key: str) -> str:
     return f"{address_key}_{CONF_INVERT_OUTGOING}"
 

custom_components/ha_knx_bridge/const.py

@@ -4,10 +4,11 @@ CONF_KNX_ENTRY_ID = "knx_entry_id"
 
 CONF_STATE_ADDRESS = "state_address"
 CONF_COMMAND_ADDRESS = "command_address"
-CONF_INVERT_INCOMING = "invert_incoming"
 CONF_INVERT_OUTGOING = "invert_outgoing"
 CONF_PORTS = "ports"
 CONF_PORT_ID = "port_id"
+CONF_PORT_ENABLED = "port_enabled"
+CONF_ENABLED = "enabled"
 
 CONF_MOVE_LONG_ADDRESS = "move_long_address"
 CONF_MOVE_SHORT_ADDRESS = "move_short_address"

custom_components/ha_knx_bridge/manifest.json

@@ -1,7 +1,7 @@
 {
   "domain": "ha_knx_bridge",
   "name": "HA KNX Bridge",
-  "version": "0.0.14",
+  "version": "0.0.20",
   "config_flow": true,
   "documentation": "https://github.com/bahmcloud/HA-KNX-Bridge",
   "issue_tracker": "https://github.com/bahmcloud/HA-KNX-Bridge/issues",

custom_components/ha_knx_bridge/strings.json

@@ -36,7 +36,6 @@
         "data": {
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
-          "state_address_invert_incoming": "Invert incoming",
           "state_address_invert_outgoing": "Invert outgoing"
         }
       },
@@ -45,10 +44,8 @@
         "data": {
           "entity_id": "Switch entity",
           "command_address": "Command group address (DPT 1)",
-          "command_address_invert_incoming": "Invert incoming",
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
-          "state_address_invert_incoming": "Invert incoming",
           "state_address_invert_outgoing": "Invert outgoing"
         }
       },
@@ -57,25 +54,18 @@
         "data": {
           "entity_id": "Cover entity",
           "move_long_address": "Move long (DPT 1.008 Up/Down)",
-          "move_long_address_invert_incoming": "Invert incoming",
           "move_long_address_invert_outgoing": "Invert outgoing",
           "move_short_address": "Move short (DPT 1.007 Step)",
-          "move_short_address_invert_incoming": "Invert incoming",
           "move_short_address_invert_outgoing": "Invert outgoing",
           "stop_address": "Stop (DPT 1)",
-          "stop_address_invert_incoming": "Invert incoming",
           "stop_address_invert_outgoing": "Invert outgoing",
           "position_address": "Set position (DPT 5.001)",
-          "position_address_invert_incoming": "Invert incoming",
           "position_address_invert_outgoing": "Invert outgoing",
           "position_state_address": "State position (DPT 5.001)",
-          "position_state_address_invert_incoming": "Invert incoming",
           "position_state_address_invert_outgoing": "Invert outgoing",
           "angle_address": "Set tilt (DPT 5.001)",
-          "angle_address_invert_incoming": "Invert incoming",
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
-          "angle_state_address_invert_incoming": "Invert incoming",
           "angle_state_address_invert_outgoing": "Invert outgoing"
         }
       },
@@ -98,8 +88,8 @@
           "data": {
             "entity_id": "Binary sensor entity",
             "state_address": "State group address (DPT 1)",
-            "state_address_invert_incoming": "Invert incoming",
-            "state_address_invert_outgoing": "Invert outgoing"
+            "state_address_invert_outgoing": "Invert outgoing",
+            "enabled": "Enabled"
           }
         }
       }
@@ -111,11 +101,10 @@
           "data": {
             "entity_id": "Switch entity",
             "command_address": "Command group address (DPT 1)",
-            "command_address_invert_incoming": "Invert incoming",
             "command_address_invert_outgoing": "Invert outgoing",
             "state_address": "State group address (DPT 1)",
-            "state_address_invert_incoming": "Invert incoming",
-            "state_address_invert_outgoing": "Invert outgoing"
+            "state_address_invert_outgoing": "Invert outgoing",
+            "enabled": "Enabled"
           }
         }
       }
@@ -127,26 +116,20 @@
           "data": {
             "entity_id": "Cover entity",
             "move_long_address": "Move long (DPT 1.008 Up/Down)",
-            "move_long_address_invert_incoming": "Invert incoming",
             "move_long_address_invert_outgoing": "Invert outgoing",
             "move_short_address": "Move short (DPT 1.007 Step)",
-            "move_short_address_invert_incoming": "Invert incoming",
             "move_short_address_invert_outgoing": "Invert outgoing",
             "stop_address": "Stop (DPT 1)",
-            "stop_address_invert_incoming": "Invert incoming",
             "stop_address_invert_outgoing": "Invert outgoing",
             "position_address": "Set position (DPT 5.001)",
-            "position_address_invert_incoming": "Invert incoming",
             "position_address_invert_outgoing": "Invert outgoing",
             "position_state_address": "State position (DPT 5.001)",
-            "position_state_address_invert_incoming": "Invert incoming",
             "position_state_address_invert_outgoing": "Invert outgoing",
             "angle_address": "Set tilt (DPT 5.001)",
-            "angle_address_invert_incoming": "Invert incoming",
             "angle_address_invert_outgoing": "Invert outgoing",
             "angle_state_address": "State tilt (DPT 5.001)",
-            "angle_state_address_invert_incoming": "Invert incoming",
-            "angle_state_address_invert_outgoing": "Invert outgoing"
+            "angle_state_address_invert_outgoing": "Invert outgoing",
+            "enabled": "Enabled"
           }
         }
       }

custom_components/ha_knx_bridge/switch.py

@@ -0,0 +1,76 @@
+from __future__ import annotations
+
+from dataclasses import dataclass
+from typing import Any
+
+from homeassistant.config_entries import ConfigEntry
+from homeassistant.core import HomeAssistant
+from homeassistant.helpers.entity import DeviceInfo
+from homeassistant.components.switch import SwitchEntity
+
+from .const import CONF_PORTS, CONF_PORT_ENABLED, DOMAIN
+from .bridge import iter_ports
+
+
+@dataclass(frozen=True)
+class PortDescriptor:
+    port_id: str
+    port_type: str
+    title: str
+
+
+async def async_setup_entry(
+    hass: HomeAssistant, entry: ConfigEntry, async_add_entities
+) -> None:
+    entities: list[SwitchEntity] = []
+    for port in iter_ports(entry):
+        entities.append(
+            PortEnabledSwitch(entry, port.port_id, port.port_type, port.title)
+        )
+    async_add_entities(entities, update_before_add=True)
+
+
+class PortEnabledSwitch(SwitchEntity):
+    _attr_has_entity_name = True
+
+    def __init__(self, entry: ConfigEntry, port_id: str, port_type: str, title: str):
+        self._entry = entry
+        self._port_id = port_id
+        self._port_type = port_type
+        self._title = title
+        self._attr_unique_id = f"{entry.entry_id}_{port_id}_enabled"
+
+    @property
+    def name(self) -> str:
+        return f"{self._title} Enabled"
+
+    @property
+    def device_info(self) -> DeviceInfo:
+        return DeviceInfo(
+            identifiers={(DOMAIN, self._entry.entry_id)},
+            name="HA KNX Bridge",
+            manufacturer="HA KNX Bridge",
+            model="Integration",
+        )
+
+    @property
+    def is_on(self) -> bool:
+        overrides = self._entry.options.get(CONF_PORT_ENABLED, {})
+        if self._port_id in overrides:
+            return bool(overrides[self._port_id])
+        return True
+
+    async def async_turn_on(self, **kwargs: Any) -> None:
+        await self._async_set_enabled(True)
+
+    async def async_turn_off(self, **kwargs: Any) -> None:
+        await self._async_set_enabled(False)
+
+    async def _async_set_enabled(self, enabled: bool) -> None:
+        overrides = dict(self._entry.options.get(CONF_PORT_ENABLED, {}))
+        overrides[self._port_id] = enabled
+        self.hass.config_entries.async_update_entry(
+            self._entry,
+            options={**self._entry.options, CONF_PORT_ENABLED: overrides},
+        )
+        await self.hass.config_entries.async_reload(self._entry.entry_id)

custom_components/ha_knx_bridge/translations/ar.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/bg.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ca.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/cs.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/da.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/de.json

@@ -1,71 +1,113 @@
 {
   "options": {
     "abort": {
-      "no_ports_to_remove": "Es gibt noch keine Ports zum Entfernen."
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
     },
     "step": {
       "init": {
-        "title": "HA KNX Bridge Optionen",
-        "description": "Ports verwalten, wenn Subentries nicht verfügbar sind.",
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
         "menu_options": {
-          "add_binary_sensor": "Binary-Sensor-Port hinzufügen",
-          "add_switch": "Schalter-Port hinzufügen",
-          "add_cover": "Cover-Port hinzufügen",
-          "remove_port": "Port entfernen"
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
         }
       },
       "add_binary_sensor": {
-        "title": "Binary-Sensor-Port hinzufügen",
+        "title": "Add Binary Sensor Port",
         "data": {
-          "entity_id": "Binary-Sensor-Entity",
-          "state_address": "State-Gruppenadresse (DPT 1)",
-          "state_address_invert_incoming": "Eingehend invertieren",
-          "state_address_invert_outgoing": "Ausgehend invertieren"
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
-        "title": "Schalter-Port hinzufügen",
+        "title": "Add Switch Port",
         "data": {
-          "entity_id": "Schalter-Entity",
-          "command_address": "Command-Gruppenadresse (DPT 1)",
-          "command_address_invert_incoming": "Eingehend invertieren",
-          "command_address_invert_outgoing": "Ausgehend invertieren",
-          "state_address": "State-Gruppenadresse (DPT 1)",
-          "state_address_invert_incoming": "Eingehend invertieren",
-          "state_address_invert_outgoing": "Ausgehend invertieren"
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
-        "title": "Cover-Port hinzufügen",
+        "title": "Add Cover Port",
         "data": {
-          "entity_id": "Cover-Entity",
-          "move_long_address": "Move long (DPT 1.008 Auf/Ab)",
-          "move_long_address_invert_incoming": "Eingehend invertieren",
-          "move_long_address_invert_outgoing": "Ausgehend invertieren",
-          "move_short_address": "Move short (DPT 1.007 Schritt)",
-          "move_short_address_invert_incoming": "Eingehend invertieren",
-          "move_short_address_invert_outgoing": "Ausgehend invertieren",
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
           "stop_address": "Stop (DPT 1)",
-          "stop_address_invert_incoming": "Eingehend invertieren",
-          "stop_address_invert_outgoing": "Ausgehend invertieren",
-          "position_address": "Position setzen (DPT 5.001)",
-          "position_address_invert_incoming": "Eingehend invertieren",
-          "position_address_invert_outgoing": "Ausgehend invertieren",
-          "position_state_address": "Positionsstatus (DPT 5.001)",
-          "position_state_address_invert_incoming": "Eingehend invertieren",
-          "position_state_address_invert_outgoing": "Ausgehend invertieren",
-          "angle_address": "Tilt setzen (DPT 5.001)",
-          "angle_address_invert_incoming": "Eingehend invertieren",
-          "angle_address_invert_outgoing": "Ausgehend invertieren",
-          "angle_state_address": "Tilt-Status (DPT 5.001)",
-          "angle_state_address_invert_incoming": "Eingehend invertieren",
-          "angle_state_address_invert_outgoing": "Ausgehend invertieren"
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
-        "title": "Port entfernen",
+        "title": "Remove Port",
         "data": {
-          "port_id": "Zu entfernender Port"
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       }
     }

custom_components/ha_knx_bridge/translations/el.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/en.json

@@ -1,7 +1,8 @@
 {
   "options": {
     "abort": {
-      "no_ports_to_remove": "There are no ports to remove yet."
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
     },
     "step": {
       "init": {
@@ -11,6 +12,7 @@
           "add_binary_sensor": "Add binary sensor port",
           "add_switch": "Add switch port",
           "add_cover": "Add cover port",
+          "edit_port": "Edit port",
           "remove_port": "Remove port"
         }
       },
@@ -19,8 +21,8 @@
         "data": {
           "entity_id": "Binary sensor entity",
           "state_address": "State group address (DPT 1)",
-          "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_switch": {
@@ -28,11 +30,10 @@
         "data": {
           "entity_id": "Switch entity",
           "command_address": "Command group address (DPT 1)",
-          "command_address_invert_incoming": "Invert incoming",
           "command_address_invert_outgoing": "Invert outgoing",
           "state_address": "State group address (DPT 1)",
-          "state_address_invert_incoming": "Invert incoming",
-          "state_address_invert_outgoing": "Invert outgoing"
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "add_cover": {
@@ -40,26 +41,20 @@
         "data": {
           "entity_id": "Cover entity",
           "move_long_address": "Move long (DPT 1.008 Up/Down)",
-          "move_long_address_invert_incoming": "Invert incoming",
           "move_long_address_invert_outgoing": "Invert outgoing",
           "move_short_address": "Move short (DPT 1.007 Step)",
-          "move_short_address_invert_incoming": "Invert incoming",
           "move_short_address_invert_outgoing": "Invert outgoing",
           "stop_address": "Stop (DPT 1)",
-          "stop_address_invert_incoming": "Invert incoming",
           "stop_address_invert_outgoing": "Invert outgoing",
           "position_address": "Set position (DPT 5.001)",
-          "position_address_invert_incoming": "Invert incoming",
           "position_address_invert_outgoing": "Invert outgoing",
           "position_state_address": "State position (DPT 5.001)",
-          "position_state_address_invert_incoming": "Invert incoming",
           "position_state_address_invert_outgoing": "Invert outgoing",
           "angle_address": "Set tilt (DPT 5.001)",
-          "angle_address_invert_incoming": "Invert incoming",
           "angle_address_invert_outgoing": "Invert outgoing",
           "angle_state_address": "State tilt (DPT 5.001)",
-          "angle_state_address_invert_incoming": "Invert incoming",
-          "angle_state_address_invert_outgoing": "Invert outgoing"
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
         }
       },
       "remove_port": {
@@ -67,6 +62,53 @@
         "data": {
           "port_id": "Port to remove"
         }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
       }
     }
   }

custom_components/ha_knx_bridge/translations/es.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/et.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/fi.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/fr.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/he.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/hi.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/hr.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/hu.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/id.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/is.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/it.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ja.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ko.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/lt.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/lv.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/nb.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/nl.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/pl.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/pt-BR.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/pt.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ro.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ru.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/sk.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/sl.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/sv.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/th.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/tr.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/uk.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/vi.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/zh-Hans.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/zh-Hant.json

@@ -0,0 +1,115 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_outgoing": "Invert outgoing",
+          "enabled": "Enabled"
+        }
+      }
+    }
+  }
+}