Add edit port flow and locale fallbacks

CHANGELOG.md

@@ -1,5 +1,15 @@
 # Changelog
 
+## 0.0.17 - 2026-02-13
+- Add edit port flow to update existing option-based ports.
+- Add fallback translations for all supported Home Assistant locales.
+
+## 0.0.16 - 2026-02-13
+- Normalize incoming event destinations and clamp percent payloads even without inversion.
+
+## 0.0.15 - 2026-02-13
+- Remove unsupported `payload_length` field from KNX send calls.
+
 ## 0.0.14 - 2026-02-13
 - Improve KNX event decoding for cover commands and address the up/down mapping.
 

README.md

@@ -67,6 +67,6 @@ Each group address has `invert incoming` and `invert outgoing` toggles to flip K
 - Advanced DPT mapping options and inversion settings.
 
 ## Versioning and Releases
-- Current version: 0.0.14
+- Current version: 0.0.17
 - `CHANGELOG.md` lists versions with the newest entries at the top.
 - Release creation is manual and only done when explicitly requested.

custom_components/ha_knx_bridge/bridge.py

@@ -482,11 +482,7 @@ class BridgeManager:
         if direction is not None and not str(direction).lower().startswith("incoming"):
             return
 
-        destination = (
-            event.data.get("destination")
-            or event.data.get("destination_address")
-            or event.data.get("address")
-        )
+        destination = _event_destination(event)
         if not destination:
             return
 
@@ -502,9 +498,8 @@ class BridgeManager:
         value = _extract_event_value(event)
         if value is None:
             return
-        value = _invert_value(
-            value, event.data.get("destination"), self._address_options, "incoming"
-        )
+        destination = _event_destination(event)
+        value = _invert_value(value, destination, self._address_options, "incoming")
 
         if action == "move_long":
             if value == 0:
@@ -530,9 +525,8 @@ class BridgeManager:
         value = _extract_event_value(event)
         if value is None:
             return
-        value = _invert_value(
-            value, event.data.get("destination"), self._address_options, "incoming"
-        )
+        destination = _event_destination(event)
+        value = _invert_value(value, destination, self._address_options, "incoming")
         if value == 0:
             await self._call_switch_service(port.entity_id, "turn_off")
         elif value == 1:
@@ -564,7 +558,7 @@ class BridgeManager:
         await self.hass.services.async_call(
             KNX_DOMAIN,
             "send",
-            {"address": address, "payload": payload, "payload_length": 0},
+            {"address": address, "payload": payload},
             blocking=False,
         )
 
@@ -624,6 +618,8 @@ def _invert_value(
     options = address_options.get(address)
     if options is None:
         return value
+    if options.value_type == "percent":
+        value = _clamp_percent(value)
     if direction == "incoming":
         if not options.invert_incoming:
             return value
@@ -631,7 +627,6 @@ def _invert_value(
         if not options.invert_outgoing:
             return value
     if options.value_type == "percent":
-        value = _clamp_percent(value)
         return 100 - value
     if value not in (0, 1):
         return value
@@ -680,6 +675,14 @@ def _map_scalar_value(value: Any) -> int | None:
     return None
 
 
+def _event_destination(event: Event) -> str | None:
+    return (
+        event.data.get("destination")
+        or event.data.get("destination_address")
+        or event.data.get("address")
+    )
+
+
 def _iter_port_configs(entry: ConfigEntry) -> list[tuple[str, dict[str, Any]]]:
     ports: list[tuple[str, dict[str, Any]]] = []
     subentries = getattr(entry, "subentries", [])

custom_components/ha_knx_bridge/config_flow.py

@@ -98,6 +98,7 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
                 "add_binary_sensor",
                 "add_switch",
                 "add_cover",
+                "edit_port",
                 "remove_port",
             ],
         )
@@ -188,6 +189,64 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
         )
         return self.async_show_form(step_id="remove_port", data_schema=schema)
 
+    async def async_step_edit_port(self, user_input: dict | None = None):
+        ports = list(self._config_entry.options.get(CONF_PORTS, []))
+        if not ports:
+            return self.async_abort(reason="no_ports_to_edit")
+
+        if user_input is not None and CONF_PORT_ID in user_input:
+            port_id = user_input[CONF_PORT_ID]
+            port = next((item for item in ports if item.get("id") == port_id), None)
+            if port is None:
+                return self.async_abort(reason="no_ports_to_edit")
+            self.context["port_id"] = port_id
+            port_type = port.get("type")
+            data = port.get("data", {})
+            if port_type == "binary_sensor":
+                return self.async_show_form(
+                    step_id="edit_binary_sensor",
+                    data_schema=_binary_sensor_schema(defaults=data),
+                )
+            if port_type == "switch":
+                return self.async_show_form(
+                    step_id="edit_switch",
+                    data_schema=_switch_schema(defaults=data),
+                )
+            if port_type == "cover":
+                return self.async_show_form(
+                    step_id="edit_cover",
+                    data_schema=_cover_schema(defaults=data),
+                )
+            return self.async_abort(reason="no_ports_to_edit")
+
+        options = [
+            {
+                "value": port.get("id"),
+                "label": port.get("title", port.get("id")),
+            }
+            for port in ports
+            if port.get("id")
+        ]
+        schema = vol.Schema(
+            {
+                vol.Required(CONF_PORT_ID): selector.SelectSelector(
+                    selector.SelectSelectorConfig(options=options, mode="dropdown")
+                )
+            }
+        )
+        return self.async_show_form(step_id="edit_port", data_schema=schema)
+
+    async def async_step_edit_binary_sensor(self, user_input: dict | None = None):
+        return await self._async_edit_port(
+            "binary_sensor", user_input, _binary_sensor_schema
+        )
+
+    async def async_step_edit_switch(self, user_input: dict | None = None):
+        return await self._async_edit_port("switch", user_input, _switch_schema)
+
+    async def async_step_edit_cover(self, user_input: dict | None = None):
+        return await self._async_edit_port("cover", user_input, _cover_schema)
+
     async def _async_store_port(self, port_type: str, user_input: dict):
         ports = list(self._config_entry.options.get(CONF_PORTS, []))
         title = _entity_title(self.hass, user_input[CONF_ENTITY_ID])
@@ -201,6 +260,34 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
         )
         return self.async_create_entry(title="", data={CONF_PORTS: ports})
 
+    async def _async_edit_port(self, port_type: str, user_input, schema_factory):
+        ports = list(self._config_entry.options.get(CONF_PORTS, []))
+        port_id = self.context.get("port_id")
+        if port_id is None:
+            return self.async_abort(reason="no_ports_to_edit")
+
+        port = next((item for item in ports if item.get("id") == port_id), None)
+        if port is None:
+            return self.async_abort(reason="no_ports_to_edit")
+
+        if user_input is None:
+            return self.async_show_form(
+                step_id=f"edit_{port_type}",
+                data_schema=schema_factory(defaults=port.get("data", {})),
+            )
+
+        user_input, errors = _validate_knx_addresses(user_input, _port_keys(port_type))
+        if errors:
+            return self.async_show_form(
+                step_id=f"edit_{port_type}",
+                data_schema=schema_factory(defaults=user_input),
+                errors=errors,
+            )
+
+        port["data"] = user_input
+        port["title"] = _entity_title(self.hass, user_input[CONF_ENTITY_ID])
+        return self.async_create_entry(title="", data={CONF_PORTS: ports})
+
 
 class BinarySensorPortSubentryFlow(config_entries.ConfigSubentryFlow):
     VERSION = 1
@@ -275,126 +362,246 @@ def _entity_title(hass, entity_id: str) -> str:
     return state.attributes.get("friendly_name", entity_id)
 
 
-def _binary_sensor_schema() -> vol.Schema:
+def _binary_sensor_schema(defaults: dict | None = None) -> vol.Schema:
+    defaults = defaults or {}
     return vol.Schema(
         {
-            vol.Required(CONF_ENTITY_ID): selector.EntitySelector(
+            vol.Required(
+                CONF_ENTITY_ID,
+                default=defaults.get(CONF_ENTITY_ID, ""),
+            ): selector.EntitySelector(
                 selector.EntitySelectorConfig(domain=["binary_sensor"])
             ),
-            vol.Optional(CONF_STATE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_STATE_ADDRESS,
+                default=defaults.get(CONF_STATE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
         }
     )
 
 
-def _cover_schema() -> vol.Schema:
+def _cover_schema(defaults: dict | None = None) -> vol.Schema:
+    defaults = defaults or {}
     return vol.Schema(
         {
-            vol.Required(CONF_ENTITY_ID): selector.EntitySelector(
+            vol.Required(
+                CONF_ENTITY_ID,
+                default=defaults.get(CONF_ENTITY_ID, ""),
+            ): selector.EntitySelector(
                 selector.EntitySelectorConfig(domain=["cover"])
             ),
-            vol.Optional(CONF_MOVE_LONG_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_MOVE_LONG_ADDRESS,
+                default=defaults.get(CONF_MOVE_LONG_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_MOVE_LONG_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_MOVE_LONG_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_MOVE_LONG_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_MOVE_LONG_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_MOVE_LONG_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_MOVE_LONG_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(CONF_MOVE_SHORT_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_MOVE_SHORT_ADDRESS,
+                default=defaults.get(CONF_MOVE_SHORT_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_MOVE_SHORT_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_MOVE_SHORT_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_MOVE_SHORT_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_MOVE_SHORT_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_MOVE_SHORT_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_MOVE_SHORT_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(CONF_STOP_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_STOP_ADDRESS,
+                default=defaults.get(CONF_STOP_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_STOP_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_STOP_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_STOP_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_STOP_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_STOP_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_STOP_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(CONF_POSITION_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_POSITION_ADDRESS,
+                default=defaults.get(CONF_POSITION_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_POSITION_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_POSITION_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_POSITION_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_POSITION_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_POSITION_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_POSITION_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(CONF_POSITION_STATE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_POSITION_STATE_ADDRESS,
+                default=defaults.get(CONF_POSITION_STATE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_POSITION_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_POSITION_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_POSITION_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_POSITION_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_POSITION_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_POSITION_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(CONF_ANGLE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_ANGLE_ADDRESS,
+                default=defaults.get(CONF_ANGLE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_ANGLE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_ANGLE_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_ANGLE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_ANGLE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_ANGLE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_ANGLE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(CONF_ANGLE_STATE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_ANGLE_STATE_ADDRESS,
+                default=defaults.get(CONF_ANGLE_STATE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_ANGLE_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_ANGLE_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_ANGLE_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_ANGLE_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_ANGLE_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_ANGLE_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
         }
     )
 
 
-def _switch_schema() -> vol.Schema:
+def _switch_schema(defaults: dict | None = None) -> vol.Schema:
+    defaults = defaults or {}
     return vol.Schema(
         {
-            vol.Required(CONF_ENTITY_ID): selector.EntitySelector(
+            vol.Required(
+                CONF_ENTITY_ID,
+                default=defaults.get(CONF_ENTITY_ID, ""),
+            ): selector.EntitySelector(
                 selector.EntitySelectorConfig(domain=["switch"])
             ),
-            vol.Optional(CONF_COMMAND_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_COMMAND_ADDRESS,
+                default=defaults.get(CONF_COMMAND_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_COMMAND_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_COMMAND_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_COMMAND_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_COMMAND_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_COMMAND_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_COMMAND_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(CONF_STATE_ADDRESS): selector.TextSelector(
+            vol.Optional(
+                CONF_STATE_ADDRESS,
+                default=defaults.get(CONF_STATE_ADDRESS, ""),
+            ): selector.TextSelector(
                 selector.TextSelectorConfig(type="text")
             ),
-            vol.Optional(_invert_in_key(CONF_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_in_key(CONF_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_in_key(CONF_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
-            vol.Optional(_invert_out_key(CONF_STATE_ADDRESS), default=False): (
+            vol.Optional(
+                _invert_out_key(CONF_STATE_ADDRESS),
+                default=bool(defaults.get(_invert_out_key(CONF_STATE_ADDRESS))),
+            ): (
                 selector.BooleanSelector()
             ),
         }
     )
 
 
+def _port_keys(port_type: str) -> list[str]:
+    if port_type == "binary_sensor":
+        return [CONF_STATE_ADDRESS]
+    if port_type == "switch":
+        return [CONF_COMMAND_ADDRESS, CONF_STATE_ADDRESS]
+    if port_type == "cover":
+        return [
+            CONF_MOVE_LONG_ADDRESS,
+            CONF_MOVE_SHORT_ADDRESS,
+            CONF_STOP_ADDRESS,
+            CONF_POSITION_ADDRESS,
+            CONF_POSITION_STATE_ADDRESS,
+            CONF_ANGLE_ADDRESS,
+            CONF_ANGLE_STATE_ADDRESS,
+        ]
+    return []
+
+
 def _validate_knx_addresses(
     user_input: dict, keys: list[str]
 ) -> tuple[dict, dict[str, str]]:

custom_components/ha_knx_bridge/manifest.json

@@ -1,7 +1,7 @@
 {
   "domain": "ha_knx_bridge",
   "name": "HA KNX Bridge",
-  "version": "0.0.14",
+  "version": "0.0.17",
   "config_flow": true,
   "documentation": "https://github.com/bahmcloud/HA-KNX-Bridge",
   "issue_tracker": "https://github.com/bahmcloud/HA-KNX-Bridge/issues",

custom_components/ha_knx_bridge/translations/ar.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/bg.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ca.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/cs.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/da.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/de.json

@@ -1,71 +1,127 @@
 {
   "options": {
     "abort": {
-      "no_ports_to_remove": "Es gibt noch keine Ports zum Entfernen."
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
     },
     "step": {
       "init": {
-        "title": "HA KNX Bridge Optionen",
-        "description": "Ports verwalten, wenn Subentries nicht verfügbar sind.",
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
         "menu_options": {
-          "add_binary_sensor": "Binary-Sensor-Port hinzufügen",
-          "add_switch": "Schalter-Port hinzufügen",
-          "add_cover": "Cover-Port hinzufügen",
-          "remove_port": "Port entfernen"
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
         }
       },
       "add_binary_sensor": {
-        "title": "Binary-Sensor-Port hinzufügen",
+        "title": "Add Binary Sensor Port",
         "data": {
-          "entity_id": "Binary-Sensor-Entity",
-          "state_address": "State-Gruppenadresse (DPT 1)",
-          "state_address_invert_incoming": "Eingehend invertieren",
-          "state_address_invert_outgoing": "Ausgehend invertieren"
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
         }
       },
       "add_switch": {
-        "title": "Schalter-Port hinzufügen",
+        "title": "Add Switch Port",
         "data": {
-          "entity_id": "Schalter-Entity",
-          "command_address": "Command-Gruppenadresse (DPT 1)",
-          "command_address_invert_incoming": "Eingehend invertieren",
-          "command_address_invert_outgoing": "Ausgehend invertieren",
-          "state_address": "State-Gruppenadresse (DPT 1)",
-          "state_address_invert_incoming": "Eingehend invertieren",
-          "state_address_invert_outgoing": "Ausgehend invertieren"
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
         }
       },
       "add_cover": {
-        "title": "Cover-Port hinzufügen",
+        "title": "Add Cover Port",
         "data": {
-          "entity_id": "Cover-Entity",
-          "move_long_address": "Move long (DPT 1.008 Auf/Ab)",
-          "move_long_address_invert_incoming": "Eingehend invertieren",
-          "move_long_address_invert_outgoing": "Ausgehend invertieren",
-          "move_short_address": "Move short (DPT 1.007 Schritt)",
-          "move_short_address_invert_incoming": "Eingehend invertieren",
-          "move_short_address_invert_outgoing": "Ausgehend invertieren",
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
           "stop_address": "Stop (DPT 1)",
-          "stop_address_invert_incoming": "Eingehend invertieren",
-          "stop_address_invert_outgoing": "Ausgehend invertieren",
-          "position_address": "Position setzen (DPT 5.001)",
-          "position_address_invert_incoming": "Eingehend invertieren",
-          "position_address_invert_outgoing": "Ausgehend invertieren",
-          "position_state_address": "Positionsstatus (DPT 5.001)",
-          "position_state_address_invert_incoming": "Eingehend invertieren",
-          "position_state_address_invert_outgoing": "Ausgehend invertieren",
-          "angle_address": "Tilt setzen (DPT 5.001)",
-          "angle_address_invert_incoming": "Eingehend invertieren",
-          "angle_address_invert_outgoing": "Ausgehend invertieren",
-          "angle_state_address": "Tilt-Status (DPT 5.001)",
-          "angle_state_address_invert_incoming": "Eingehend invertieren",
-          "angle_state_address_invert_outgoing": "Ausgehend invertieren"
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
         }
       },
       "remove_port": {
-        "title": "Port entfernen",
+        "title": "Remove Port",
         "data": {
-          "port_id": "Zu entfernender Port"
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
         }
       }
     }

custom_components/ha_knx_bridge/translations/el.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/en.json

@@ -1,7 +1,8 @@
 {
   "options": {
     "abort": {
-      "no_ports_to_remove": "There are no ports to remove yet."
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
     },
     "step": {
       "init": {
@@ -11,6 +12,7 @@
           "add_binary_sensor": "Add binary sensor port",
           "add_switch": "Add switch port",
           "add_cover": "Add cover port",
+          "edit_port": "Edit port",
           "remove_port": "Remove port"
         }
       },
@@ -67,6 +69,60 @@
         "data": {
           "port_id": "Port to remove"
         }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
       }
     }
   }

custom_components/ha_knx_bridge/translations/es.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/et.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/fi.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/fr.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/he.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/hi.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/hr.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/hu.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/id.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/is.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/it.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ja.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ko.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/lt.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/lv.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/nb.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/nl.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/pl.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/pt-BR.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/pt.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ro.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/ru.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/sk.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/sl.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/sv.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/th.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/tr.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/uk.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/vi.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/zh-Hans.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/zh-Hant.json

@@ -0,0 +1,129 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet.",
+      "no_ports_to_edit": "There are no ports to edit yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "edit_port": "Edit port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      },
+      "edit_port": {
+        "title": "Edit Port",
+        "data": {
+          "port_id": "Port to edit"
+        }
+      },
+      "edit_binary_sensor": {
+        "title": "Edit Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_switch": {
+        "title": "Edit Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "edit_cover": {
+        "title": "Edit Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      }
+    }
+  }
+}