Remove payload_length from KNX send

CHANGELOG.md

@@ -1,5 +1,27 @@
 # Changelog
 
+## 0.0.15 - 2026-02-13
+- Remove unsupported `payload_length` field from KNX send calls.
+
+## 0.0.14 - 2026-02-13
+- Improve KNX event decoding for cover commands and address the up/down mapping.
+
+## 0.0.13 - 2026-02-13
+- Clamp percent payloads to avoid invalid KNX DPT 5.001 values.
+
+## 0.0.12 - 2026-02-13
+- Fix KNX event listener setup for HA versions without async_track_event helper.
+
+## 0.0.11 - 2026-02-13
+- Move translations into the integration folder so UI labels render.
+- Downgrade missing subentry support log to debug.
+
+## 0.0.10 - 2026-02-13
+- Add translations for options flow menu labels.
+
+## 0.0.9 - 2026-02-13
+- Add options flow fallback to add/remove ports when subentries are unavailable.
+
 ## 0.0.8 - 2026-02-13
 - Improve subentry type detection for HA versions exposing different class names.
 

README.md

@@ -21,6 +21,8 @@ Current minimal scope:
 ## Configure
 1. During setup, select the existing Home Assistant KNX integration entry.
 2. Add Ports from the integration's configuration page.
+   If the "Add Port" UI is missing, open the integration options and manage ports
+   there (fallback for HA versions without subentry support).
 
 ### Binary Sensor Port
 - `entity_id`: the HA binary_sensor to mirror.
@@ -65,6 +67,6 @@ Each group address has `invert incoming` and `invert outgoing` toggles to flip K
 - Advanced DPT mapping options and inversion settings.
 
 ## Versioning and Releases
-- Current version: 0.0.8
+- Current version: 0.0.15
 - `CHANGELOG.md` lists versions with the newest entries at the top.
 - Release creation is manual and only done when explicitly requested.

custom_components/ha_knx_bridge/bridge.py

@@ -12,12 +12,14 @@ from homeassistant.helpers import event as event_helper
 from .const import (
     CONF_ANGLE_ADDRESS,
     CONF_ANGLE_STATE_ADDRESS,
+    ADDRESS_EVENT_TYPE,
     ADDRESS_VALUE_TYPE,
     CONF_COMMAND_ADDRESS,
     CONF_INVERT_INCOMING,
     CONF_INVERT_OUTGOING,
     CONF_MOVE_LONG_ADDRESS,
     CONF_MOVE_SHORT_ADDRESS,
+    CONF_PORTS,
     CONF_POSITION_ADDRESS,
     CONF_POSITION_STATE_ADDRESS,
     CONF_STATE_ADDRESS,
@@ -117,10 +119,8 @@ class BridgeManager:
         switch_ports: list[SwitchPort] = []
         cover_ports: list[CoverPort] = []
 
-        subentries = getattr(self.entry, "subentries", [])
-        for subentry in subentries:
-            data = subentry.data
-            if subentry.type == "binary_sensor":
+        for port_type, data in _iter_port_configs(self.entry):
+            if port_type == "binary_sensor":
                 binary_ports.append(
                     BinarySensorPort(
                         entity_id=data["entity_id"],
@@ -133,7 +133,7 @@ class BridgeManager:
                         ),
                     )
                 )
-            elif subentry.type == "switch":
+            elif port_type == "switch":
                 switch_ports.append(
                     SwitchPort(
                         entity_id=data["entity_id"],
@@ -155,7 +155,7 @@ class BridgeManager:
                         ),
                     )
                 )
-            elif subentry.type == "cover":
+            elif port_type == "cover":
                 cover_ports.append(
                     CoverPort(
                         entity_id=data["entity_id"],
@@ -330,9 +330,14 @@ class BridgeManager:
             )
 
         if self._address_handlers:
-            self._knx_event_unsub = event_helper.async_track_event(
-                self.hass, "knx_event", self._handle_knx_event
-            )
+            if hasattr(event_helper, "async_track_event"):
+                self._knx_event_unsub = event_helper.async_track_event(
+                    self.hass, "knx_event", self._handle_knx_event
+                )
+            else:
+                self._knx_event_unsub = self.hass.bus.async_listen(
+                    "knx_event", self._handle_knx_event
+                )
 
         await self._register_knx_events()
 
@@ -352,10 +357,11 @@ class BridgeManager:
             port, action, event
         )
         value_type = _get_value_type(address_key)
+        event_type = _get_event_type(address_key)
         self._remember_address_options(
             address, value_type, invert_incoming, invert_outgoing
         )
-        self._registered_addresses.append((address, value_type))
+        self._registered_addresses.append((address, event_type))
 
     def _register_knx_switch_address(
         self,
@@ -375,7 +381,7 @@ class BridgeManager:
             invert_incoming,
             invert_outgoing,
         )
-        self._registered_addresses.append((address, None))
+        self._registered_addresses.append((address, _get_event_type(CONF_COMMAND_ADDRESS)))
 
     def _remember_address_options(
         self,
@@ -391,19 +397,19 @@ class BridgeManager:
         )
 
     async def _register_knx_events(self) -> None:
-        for address, value_type in self._registered_addresses:
+        for address, event_type in self._registered_addresses:
             data: dict[str, Any] = {"address": address}
-            if value_type:
-                data["type"] = value_type
+            if event_type:
+                data["type"] = event_type
             await self.hass.services.async_call(
                 KNX_DOMAIN, "event_register", data, blocking=False
             )
 
     async def _unregister_knx_events(self) -> None:
-        for address, value_type in self._registered_addresses:
+        for address, event_type in self._registered_addresses:
             data: dict[str, Any] = {"address": address, "remove": True}
-            if value_type:
-                data["type"] = value_type
+            if event_type:
+                data["type"] = event_type
             await self.hass.services.async_call(
                 KNX_DOMAIN, "event_register", data, blocking=False
             )
@@ -472,10 +478,15 @@ class BridgeManager:
         return _handler
 
     async def _handle_knx_event(self, event: Event) -> None:
-        if event.data.get("direction") != "Incoming":
+        direction = event.data.get("direction")
+        if direction is not None and not str(direction).lower().startswith("incoming"):
             return
 
-        destination = event.data.get("destination")
+        destination = (
+            event.data.get("destination")
+            or event.data.get("destination_address")
+            or event.data.get("address")
+        )
         if not destination:
             return
 
@@ -553,13 +564,14 @@ class BridgeManager:
         await self.hass.services.async_call(
             KNX_DOMAIN,
             "send",
-            {"address": address, "payload": payload, "payload_length": 0},
+            {"address": address, "payload": payload},
             blocking=False,
         )
 
     async def _knx_send_percent(self, address: str | None, value: int) -> None:
         if not address:
             return
+        value = _clamp_percent(value)
         await self.hass.services.async_call(
             KNX_DOMAIN,
             "send",
@@ -570,15 +582,18 @@ class BridgeManager:
 
 def _extract_event_value(event: Event) -> int | None:
     if "value" in event.data:
-        try:
-            return int(event.data["value"])
-        except (TypeError, ValueError):
-            return None
+        value = event.data["value"]
+        mapped = _map_scalar_value(value)
+        if mapped is not None:
+            return mapped
     data = event.data.get("data")
     if data is None:
         return None
     if isinstance(data, list) and data:
         data = data[0]
+    mapped = _map_scalar_value(data)
+    if mapped is not None:
+        return mapped
     try:
         return int(data) & 1
     except (TypeError, ValueError):
@@ -616,6 +631,7 @@ def _invert_value(
         if not options.invert_outgoing:
             return value
     if options.value_type == "percent":
+        value = _clamp_percent(value)
         return 100 - value
     if value not in (0, 1):
         return value
@@ -632,3 +648,47 @@ def _invert_out_key(address_key: str) -> str:
 
 def _get_value_type(address_key: str) -> str | None:
     return ADDRESS_VALUE_TYPE.get(address_key)
+
+
+def _get_event_type(address_key: str) -> str | None:
+    return ADDRESS_EVENT_TYPE.get(address_key)
+
+
+def _clamp_percent(value: int) -> int:
+    if value < 0:
+        return 0
+    if value > 100:
+        return 100
+    return value
+
+
+def _map_scalar_value(value: Any) -> int | None:
+    if isinstance(value, bool):
+        return 1 if value else 0
+    if isinstance(value, (int, float)):
+        return int(value)
+    if isinstance(value, str):
+        text = value.strip().lower()
+        if text in ("on", "true", "yes", "1", "down", "close", "closed"):
+            return 1
+        if text in ("off", "false", "no", "0", "up", "open", "opened"):
+            return 0
+        try:
+            return int(text)
+        except ValueError:
+            return None
+    return None
+
+
+def _iter_port_configs(entry: ConfigEntry) -> list[tuple[str, dict[str, Any]]]:
+    ports: list[tuple[str, dict[str, Any]]] = []
+    subentries = getattr(entry, "subentries", [])
+    for subentry in subentries:
+        ports.append((subentry.type, subentry.data))
+    option_ports = entry.options.get(CONF_PORTS, [])
+    for port in option_ports:
+        port_type = port.get("type")
+        data = port.get("data", {})
+        if port_type and isinstance(data, dict):
+            ports.append((port_type, data))
+    return ports

custom_components/ha_knx_bridge/config_flow.py

@@ -1,6 +1,7 @@
 from __future__ import annotations
 
 import logging
+import uuid
 
 import voluptuous as vol
 
@@ -18,6 +19,8 @@ from .const import (
     CONF_KNX_ENTRY_ID,
     CONF_MOVE_LONG_ADDRESS,
     CONF_MOVE_SHORT_ADDRESS,
+    CONF_PORTS,
+    CONF_PORT_ID,
     CONF_POSITION_ADDRESS,
     CONF_POSITION_STATE_ADDRESS,
     CONF_STATE_ADDRESS,
@@ -67,7 +70,7 @@ class HAKnxBridgeConfigFlow(config_entries.ConfigFlow, domain=DOMAIN):
     def async_get_supported_subentry_types(config_entry):
         subentry_type = _get_subentry_type()
         if subentry_type is None:
-            _LOGGER.warning(
+            _LOGGER.debug(
                 "Config subentries are not supported in this Home Assistant version"
             )
             return {}
@@ -89,11 +92,114 @@ class HAKnxBridgeOptionsFlow(config_entries.OptionsFlow):
         self._config_entry = config_entry
 
     async def async_step_init(self, user_input: dict | None = None):
-        if user_input is not None:
-            return self.async_create_entry(title="", data=user_input)
+        return self.async_show_menu(
+            step_id="init",
+            menu_options=[
+                "add_binary_sensor",
+                "add_switch",
+                "add_cover",
+                "remove_port",
+            ],
+        )
 
-        schema = vol.Schema({})
-        return self.async_show_form(step_id="init", data_schema=schema)
+    async def async_step_add_binary_sensor(self, user_input: dict | None = None):
+        if user_input is not None:
+            user_input, errors = _validate_knx_addresses(
+                user_input,
+                [
+                    CONF_STATE_ADDRESS,
+                ],
+            )
+            if errors:
+                return self.async_show_form(
+                    step_id="add_binary_sensor",
+                    data_schema=_binary_sensor_schema(),
+                    errors=errors,
+                )
+            return await self._async_store_port("binary_sensor", user_input)
+
+        return self.async_show_form(
+            step_id="add_binary_sensor", data_schema=_binary_sensor_schema()
+        )
+
+    async def async_step_add_switch(self, user_input: dict | None = None):
+        if user_input is not None:
+            user_input, errors = _validate_knx_addresses(
+                user_input, [CONF_COMMAND_ADDRESS, CONF_STATE_ADDRESS]
+            )
+            if errors:
+                return self.async_show_form(
+                    step_id="add_switch",
+                    data_schema=_switch_schema(),
+                    errors=errors,
+                )
+            return await self._async_store_port("switch", user_input)
+
+        return self.async_show_form(
+            step_id="add_switch", data_schema=_switch_schema()
+        )
+
+    async def async_step_add_cover(self, user_input: dict | None = None):
+        if user_input is not None:
+            user_input, errors = _validate_knx_addresses(
+                user_input,
+                [
+                    CONF_MOVE_LONG_ADDRESS,
+                    CONF_MOVE_SHORT_ADDRESS,
+                    CONF_STOP_ADDRESS,
+                    CONF_POSITION_ADDRESS,
+                    CONF_POSITION_STATE_ADDRESS,
+                    CONF_ANGLE_ADDRESS,
+                    CONF_ANGLE_STATE_ADDRESS,
+                ],
+            )
+            if errors:
+                return self.async_show_form(
+                    step_id="add_cover", data_schema=_cover_schema(), errors=errors
+                )
+            return await self._async_store_port("cover", user_input)
+
+        return self.async_show_form(step_id="add_cover", data_schema=_cover_schema())
+
+    async def async_step_remove_port(self, user_input: dict | None = None):
+        ports = list(self._config_entry.options.get(CONF_PORTS, []))
+        if not ports:
+            return self.async_abort(reason="no_ports_to_remove")
+
+        if user_input is not None:
+            port_id = user_input[CONF_PORT_ID]
+            ports = [port for port in ports if port.get("id") != port_id]
+            return self.async_create_entry(title="", data={CONF_PORTS: ports})
+
+        options = [
+            {
+                "value": port.get("id"),
+                "label": port.get("title", port.get("id")),
+            }
+            for port in ports
+            if port.get("id")
+        ]
+        schema = vol.Schema(
+            {
+                vol.Required(CONF_PORT_ID): selector.SelectSelector(
+                    selector.SelectSelectorConfig(options=options, mode="dropdown")
+                )
+            }
+        )
+        return self.async_show_form(step_id="remove_port", data_schema=schema)
+
+    async def _async_store_port(self, port_type: str, user_input: dict):
+        ports = list(self._config_entry.options.get(CONF_PORTS, []))
+        title = _entity_title(self.hass, user_input[CONF_ENTITY_ID])
+        ports.append(
+            {
+                "id": uuid.uuid4().hex,
+                "type": port_type,
+                "title": title,
+                "data": user_input,
+            }
+        )
+        return self.async_create_entry(title="", data={CONF_PORTS: ports})
 
 
 class BinarySensorPortSubentryFlow(config_entries.ConfigSubentryFlow):

custom_components/ha_knx_bridge/const.py

@@ -6,6 +6,8 @@ CONF_STATE_ADDRESS = "state_address"
 CONF_COMMAND_ADDRESS = "command_address"
 CONF_INVERT_INCOMING = "invert_incoming"
 CONF_INVERT_OUTGOING = "invert_outgoing"
+CONF_PORTS = "ports"
+CONF_PORT_ID = "port_id"
 
 CONF_MOVE_LONG_ADDRESS = "move_long_address"
 CONF_MOVE_SHORT_ADDRESS = "move_short_address"
@@ -33,3 +35,12 @@ ADDRESS_VALUE_TYPE: dict[str, str] = {
     CONF_ANGLE_ADDRESS: "percent",
     CONF_ANGLE_STATE_ADDRESS: "percent",
 }
+
+ADDRESS_EVENT_TYPE: dict[str, str] = {
+    CONF_MOVE_LONG_ADDRESS: "up_down",
+    CONF_MOVE_SHORT_ADDRESS: "step",
+    CONF_POSITION_ADDRESS: "percent",
+    CONF_POSITION_STATE_ADDRESS: "percent",
+    CONF_ANGLE_ADDRESS: "percent",
+    CONF_ANGLE_STATE_ADDRESS: "percent",
+}

custom_components/ha_knx_bridge/manifest.json

@@ -1,7 +1,7 @@
 {
   "domain": "ha_knx_bridge",
   "name": "HA KNX Bridge",
-  "version": "0.0.8",
+  "version": "0.0.15",
   "config_flow": true,
   "documentation": "https://github.com/bahmcloud/HA-KNX-Bridge",
   "issue_tracker": "https://github.com/bahmcloud/HA-KNX-Bridge/issues",

custom_components/ha_knx_bridge/strings.json

@@ -17,10 +17,73 @@
     }
   },
   "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet."
+    },
     "step": {
       "init": {
         "title": "HA KNX Bridge Options",
-        "description": "No options available yet."
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
       }
     }
   },

custom_components/ha_knx_bridge/translations/de.json

@@ -0,0 +1,73 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "Es gibt noch keine Ports zum Entfernen."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Optionen",
+        "description": "Ports verwalten, wenn Subentries nicht verfügbar sind.",
+        "menu_options": {
+          "add_binary_sensor": "Binary-Sensor-Port hinzufügen",
+          "add_switch": "Schalter-Port hinzufügen",
+          "add_cover": "Cover-Port hinzufügen",
+          "remove_port": "Port entfernen"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Binary-Sensor-Port hinzufügen",
+        "data": {
+          "entity_id": "Binary-Sensor-Entity",
+          "state_address": "State-Gruppenadresse (DPT 1)",
+          "state_address_invert_incoming": "Eingehend invertieren",
+          "state_address_invert_outgoing": "Ausgehend invertieren"
+        }
+      },
+      "add_switch": {
+        "title": "Schalter-Port hinzufügen",
+        "data": {
+          "entity_id": "Schalter-Entity",
+          "command_address": "Command-Gruppenadresse (DPT 1)",
+          "command_address_invert_incoming": "Eingehend invertieren",
+          "command_address_invert_outgoing": "Ausgehend invertieren",
+          "state_address": "State-Gruppenadresse (DPT 1)",
+          "state_address_invert_incoming": "Eingehend invertieren",
+          "state_address_invert_outgoing": "Ausgehend invertieren"
+        }
+      },
+      "add_cover": {
+        "title": "Cover-Port hinzufügen",
+        "data": {
+          "entity_id": "Cover-Entity",
+          "move_long_address": "Move long (DPT 1.008 Auf/Ab)",
+          "move_long_address_invert_incoming": "Eingehend invertieren",
+          "move_long_address_invert_outgoing": "Ausgehend invertieren",
+          "move_short_address": "Move short (DPT 1.007 Schritt)",
+          "move_short_address_invert_incoming": "Eingehend invertieren",
+          "move_short_address_invert_outgoing": "Ausgehend invertieren",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Eingehend invertieren",
+          "stop_address_invert_outgoing": "Ausgehend invertieren",
+          "position_address": "Position setzen (DPT 5.001)",
+          "position_address_invert_incoming": "Eingehend invertieren",
+          "position_address_invert_outgoing": "Ausgehend invertieren",
+          "position_state_address": "Positionsstatus (DPT 5.001)",
+          "position_state_address_invert_incoming": "Eingehend invertieren",
+          "position_state_address_invert_outgoing": "Ausgehend invertieren",
+          "angle_address": "Tilt setzen (DPT 5.001)",
+          "angle_address_invert_incoming": "Eingehend invertieren",
+          "angle_address_invert_outgoing": "Ausgehend invertieren",
+          "angle_state_address": "Tilt-Status (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Eingehend invertieren",
+          "angle_state_address_invert_outgoing": "Ausgehend invertieren"
+        }
+      },
+      "remove_port": {
+        "title": "Port entfernen",
+        "data": {
+          "port_id": "Zu entfernender Port"
+        }
+      }
+    }
+  }
+}

custom_components/ha_knx_bridge/translations/en.json

@@ -0,0 +1,73 @@
+{
+  "options": {
+    "abort": {
+      "no_ports_to_remove": "There are no ports to remove yet."
+    },
+    "step": {
+      "init": {
+        "title": "HA KNX Bridge Options",
+        "description": "Manage ports when subentries are unavailable.",
+        "menu_options": {
+          "add_binary_sensor": "Add binary sensor port",
+          "add_switch": "Add switch port",
+          "add_cover": "Add cover port",
+          "remove_port": "Remove port"
+        }
+      },
+      "add_binary_sensor": {
+        "title": "Add Binary Sensor Port",
+        "data": {
+          "entity_id": "Binary sensor entity",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_switch": {
+        "title": "Add Switch Port",
+        "data": {
+          "entity_id": "Switch entity",
+          "command_address": "Command group address (DPT 1)",
+          "command_address_invert_incoming": "Invert incoming",
+          "command_address_invert_outgoing": "Invert outgoing",
+          "state_address": "State group address (DPT 1)",
+          "state_address_invert_incoming": "Invert incoming",
+          "state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "add_cover": {
+        "title": "Add Cover Port",
+        "data": {
+          "entity_id": "Cover entity",
+          "move_long_address": "Move long (DPT 1.008 Up/Down)",
+          "move_long_address_invert_incoming": "Invert incoming",
+          "move_long_address_invert_outgoing": "Invert outgoing",
+          "move_short_address": "Move short (DPT 1.007 Step)",
+          "move_short_address_invert_incoming": "Invert incoming",
+          "move_short_address_invert_outgoing": "Invert outgoing",
+          "stop_address": "Stop (DPT 1)",
+          "stop_address_invert_incoming": "Invert incoming",
+          "stop_address_invert_outgoing": "Invert outgoing",
+          "position_address": "Set position (DPT 5.001)",
+          "position_address_invert_incoming": "Invert incoming",
+          "position_address_invert_outgoing": "Invert outgoing",
+          "position_state_address": "State position (DPT 5.001)",
+          "position_state_address_invert_incoming": "Invert incoming",
+          "position_state_address_invert_outgoing": "Invert outgoing",
+          "angle_address": "Set tilt (DPT 5.001)",
+          "angle_address_invert_incoming": "Invert incoming",
+          "angle_address_invert_outgoing": "Invert outgoing",
+          "angle_state_address": "State tilt (DPT 5.001)",
+          "angle_state_address_invert_incoming": "Invert incoming",
+          "angle_state_address_invert_outgoing": "Invert outgoing"
+        }
+      },
+      "remove_port": {
+        "title": "Remove Port",
+        "data": {
+          "port_id": "Port to remove"
+        }
+      }
+    }
+  }
+}